FS32K116LIT0VFMR S32K116 Arm Cortex-M0+, 48 MHz, 128 Kb Flash, ISELED, FlexIO, QFN32 – S32K MCUs for General-Purpose

• Litšobotsi tsa ts'ebetso
Matla a matla: 2.7 ho isa ho 5.5 V
- Mefuta e fapaneng ea mocheso: -40 °C ho isa ho 105 °C bakeng sa mokhoa oa HSRUN, -40 °C ho isa ho 150 °C bakeng sa mokhoa oa RUN
• Arm™ Cortex-M4F/M0+ konokono, 32-bit CPU
- E ts'ehetsa maqhubu a ho fihla ho 112 MHz (mokhoa oa HSRUN) ka 1.25 Dhrystone MIPS ka MHz
- Arm Core e ipapisitse le Armv7 Architecture le Thumb®-2 ISA
- Sesebelisoa se kopaneng sa Digital Signal (DSP)
- Selaoli se hlophisitsoeng sa Nested Vectored Interrupt (NVIC)
- Setsi se le seng sa Precision Floating Point (FPU)
• Mahokelo a oache
- 4 - 40 MHz oscillator ea kantle e potlakileng (SOSC) e fihlang ho 50 MHz DC oache ea lisekoere ea kantle ka mokhoa oa oache ea kantle.
- 48 MHz Fast Internal RC oscillator (FIRC)
– 8 MHz Slow Internal RC oscillator (SIRC)
– 128 kHz Low Power Oscillator (LPO)
– Ho fihla ho 112 MHz (HSRUN) Lock Lock Loop (SPLL) ea Sistimi
- Ho fihla ho 20 MHz TCLK le 25 MHz SWD_CLK
- 32 kHz Real Time Counter oache ea kantle (RTC_CLKIN)
• Tsamaiso ea matla
- Matla a tlase a Arm Cortex-M4F/M0+ a nang le ts'ebetso e ntle haholo ea matla
+ Power Management Controller (PMC) e nang le mekhoa e mengata ea matla: HSRUN, RUN, STOP, VLPR, le VLPS.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/e hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane nyeoe ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.
- Ts'ebetso ea li-clock le ts'ebetso ea matla a tlase e tšehetsoeng ke li-peripherals tse itseng.
• Mahokelo a memori le memori
- Ho fihla ho 2 MB ea memori ea lenaneo le ECC
- 64 KB FlexNVM bakeng sa memori ea data flash e nang le ECC le EEPROM emulation.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane tšebeliso ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.
- Ho fihla ho 256 KB SRAM e nang le ECC
- Ho fihla ho 4 KB ea FlexRAM bakeng sa tšebeliso e le mohlala oa SRAM kapa EEPROM
- Ho fihla ho 4 KB Code cache ho fokotsa ts'ebetso ea ts'ebetso ea nako ea phihlello ea memori
- QuadSPI e nang le tšehetso ea HyperBus™
• Analoge ea matšoao a tsoakiloeng
- Ho fihla ho tse peli tsa 12-bit Analog-to-Digital Converter (ADC) e nang le lisebelisoa tse fihlang ho tse 32 tsa analog module ka 'ngoe.
- Sebapali se le seng sa Analog (CMP) se nang le 8-bit Digital ea kahare ho Analog Converter (DAC)
• Ho lokisa bothata
- Serial Wire JTAG Debug Port (SWJ-DP) e kopanya
- Debug Watchpoint le Trace (DWT)
- Instrumentation Trace Macrocell (ITM)
- Teko Port Interface Unit (TPIU)
- Setsi sa Flash Patch le Breakpoint (FPB).
• Sehokelo sa mochini oa batho (HMI)
- Ho fihla ho lithakhisa tse 156 tsa GPIO tse nang le ts'ebetso e sitisang
- Non-Maskable Interrupt (NMI)

• Mahokelo a puisano
- Ho fihla ho li-module tse tharo tsa Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase
- Ho fihla ho li-module tse tharo tsa Low Power Serial Peripheral Interface (LPSPI) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase.
- Ho fihla ho li-module tse peli tsa Low Power Inter-Integrated Circuit (LPI2C) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase
- Ho fihla ho li-module tse tharo tsa FlexCAN (ka tšehetso ea boikhethelo ea CAN-FD)
- Mojule oa FlexIO bakeng sa ho etsisa liprothokholo tsa puisano le li-peripherals (UART, I2C, SPI, I2S, LIN, PWM, joalo-joalo).
- Ho fihla ho 10/100Mbps Ethernet e le 'ngoe e nang le tšehetso ea IEEE1588 le li-module tse peli tsa Synchronous Audio Interface (SAI).
• Polokeho le Tshireletso
- Cryptographic Services Engine (CSEc) e sebelisa sete e felletseng ea mesebetsi ea sephiri joalo ka ha e hlalositsoe ho SHE (Secure Hardware Extension) Specification ea Ts'ebetso.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane tšebeliso ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.
- 128-bit Nomoro e Ikhethang ea Boitsebiso (ID).
- Khoutu ea ho lokisa liphoso (ECC) mabapi le mehopolo ea flash le SRAM
- Setsi sa Ts'ireletso ea Memori ea Sistimi (MPU ea Sisteme)
- Mojule oa Cyclic Redundancy Check (CRC).
- Mohlokomeli oa ka hare (WDOG)
- Mojule oa External Watchdog monitor (EWM).
• Nako le taolo
- Ho fihla ho li-module tse robeli tse ikemetseng tsa 16-bit FlexTimers (FTM), tse fanang ka liteishene tse tloaelehileng tse fihlang ho 64 (IC/OC/PWM)
– One 16-bit Low Power Timer (LPTMR) e nang le taolo e tenyetsehang ea ho tsoha
- Li-blocks tse peli tse ka khonehang tsa ho lieha ho etsa lintho (PDB) tse nang le sistimi e tenyetsehang ea trigger
- Nako e le 'ngoe ea 32-bit Low Power Interrupt Timer (LPIT) e nang le liteishene tse 4
- 32-bit Real Time Counter (RTC)
• Sephutheloana
– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP khetho ea sephutheloana
• 16 channel DMA e nang le mehloli e fihlang ho 63 ea kopo e sebelisang DMAMUX