VN7140ASTR Bakhanni ba Heke e le 'ngoe ea mochini o le mong oa HSD oa analoge oa hona joale
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | STMicroelectronics |
| Sehlopha sa Sehlahisoa: | Bakhanni ba Liheke |
| RoHS: | Lintlha |
| Sehlahisoa: | Bakhanni ba Liheke tsa MOSFET |
| Mofuta: | Lehlakore le Phahameng |
| Mounting Style: | SMD/SMT |
| Sephutheloana / Taba: | SOIC-8 |
| Nomoro ea Bakhanni: | 1 Mokhanni |
| Nomoro ea Liphetho: | 1 Sephetho |
| Sephetho sa Hona Joale: | 1 A |
| Supply Voltage - Min: | 4 V |
| Supply Voltage - Max: | 28 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 150 C |
| Letoto: | Setšoantšo sa VN7140AS |
| Tšoaneleho: | AEC-Q100 |
| Sephutheloana: | Reel |
| Sephutheloana: | Khaola Theipi |
| Sephutheloana: | MouseReel |
| Lebitso: | STMicroelectronics |
| Ha e Mamelle Mongobo: | Ee |
| Phepelo ea Hona Joale: | 3 mA |
| Output Voltage: | 5 V |
| Mofuta oa Sehlahisoa: | Bakhanni ba Liheke |
| Rds On - Ho hanyetsa Mohloli oa Drain-Source: | 140 mOhms |
| Koala: | Koala |
| Bongata ba Pakete ea Feme: | 2500 |
| Sehlopha-potlana: | PMIC - Li-IC tsa Tsamaiso ea Matla |
| Theknoloji: | Si |
| Boima ba Yuniti: | 0.010229 oz |
♠ Mokhanni ea lehlakoreng le phahameng ea nang le maikutlo a analog ea MultiSense bakeng sa lits'ebetso tsa likoloi
Lisebelisoa ke li-driver tse nang le liteishene tse holimo tse entsoeng ka theknoloji ea ST ea VIPower M0-7 'me li kenngoa ka har'a liphutheloana tsa PowerSSO-16 le SO-8.Lisebelisoa li etselitsoe ho khanna meroalo ea likoloi tsa 12 V ka sebopeho se lumellanang sa 3 V le 5 V CMOS, le ho fana ka tšireletso le tlhahlobo.
Lisebelisoa li kopanya ts'ebetso e tsoetseng pele ea ts'ireletso e kang ho fokotsa thepa ea hona joale, ho laola matla a mangata ka ho fokotsa matla le ho tima mocheso o feteletseng ka latch-off e ka lokisoang.
Pini ea FaultRST e notlolla tlhahiso ha ho ka ba le phoso kapa e tima ts'ebetso ea ho koala.
Pin e inehetseng ea multifunction multiplexed analog output e fana ka lits'ebetso tse tsoetseng pele tsa tlhahlobo tse kenyelletsang matla a holimo a lekantsoeng, maikutlo a phepelo ea motlakase le mocheso oa mocheso oa chip, ntle le ho lemoha ho tlola le ho potoloha ha nako e khuts'oane ho ea fatše, e khuts'oane ho VCC le OFF-state open-load. .
Pini e nolofalletsang kutloisiso e lumella tlhahlobo ea OFF-state hore e holofatsoe nakong ea mochini o tlase oa matla hammoho le ho arolelana maikutlo a kantle ho lisebelisoa tse tšoanang.
• AEC-Q100 e tšoanelehang
• Kakaretso
- Mokhanni o le mong ea bohlale oa lehlakore le phahameng o nang le maikutlo a analog ea MultiSense
– Boemo ba standby bo tlase haholo
- E lumellana le liphetho tsa 3 V le 5 V CMOS
• Mesebetsi ea tlhahlobo ea MultiSense
- Maikutlo a analog a mangata a: mojaro oa morao-rao o nang le seipone se nepahetseng hantle sa hona joale, motlakase oa phepelo ea VCC le mocheso oa sesebelisoa sa TCHIP
- Pontšo ea ho tlala le ho khutsufatsa fatše (ho fokotsa matla).
- Letšoao la ho koala ha mocheso
- Ts'ebetso ea OFF-state-bure-load-load
- Phatlalatso e khutšoane ho fumana VCC
- Sense lumella / tima
• Tšireletso
- Undervoltage shutdown
– Overvoltage clamp
- Laola moeli oa hajoale
- Ho ipehela meeli ea li-transients tse potlakileng tsa mocheso
- Latch-off e ka lokisoang ka mocheso o feteletseng kapa moeli oa matla ka phini e inehetseng ea ho seta botjha
- Tahlehelo ea mobu le tahlehelo ea VCC
- Hlakola betri ka likarolo tsa kantle
- Tšireletso ea electrostatic discharge
• Mefuta eohle ea meroalo ea ho hanyetsa likoloi, inductive le capacitive
• E etselitsoe ka ho khetheha bakeng sa mabone a mabone a likoloi (ho fihla ho R10W kapa LED Rear Combinations)
• Phepelo e sirelelitsoeng bakeng sa litsamaiso tsa ADAS: li-radar le li-sensor
