STM32F302K8U6TR ARM Microcontrollers – MCU Mainstream Matshwao a kopantsweng MCUs Arm Cortex-M4 core DSP & FPU, 64 Kbytes of Flash 7
♠ Tlhaloso ea Sehlahisoa
Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
Moetsi: | STMicroelectronics |
Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
Letoto: | Setšoantšo sa STM32F3 |
Sephutheloana: | Reel |
Lebitso: | STMicroelectronics |
Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
Bongata ba Pakete ea Feme: | 3000 |
Sehlopha-potlana: | Li-microcontrollers - MCU |
Lebitso la khoebo: | STM32 |
• Core: Arm® 32-bit Cortex®-M4 CPU e nang le FPU (72 MHz max.), katiso ea potoloho e le 'ngoe le karohano ea HW, litaelo tsa DSP
• Mehopolo
- 32 ho isa ho 64 Kbytes ea Flash memory
- 16 Kbytes ea SRAM ka bese ea data
• Karolo ea lipalo ea CRC
• Seta bocha le taolo ea matla
- VDD, VDDA voltage range: 2.0 ho 3.6 V
- Matla a ho sebetsa / ho theola matla (POR / PDR)
- Sesebelisoa sa motlakase se ka khonehang (PVD)
- Matla a tlase: Robala, Emisa, 'me U eme
- Phepelo ea VBAT bakeng sa RTC le li-backups
• Tsamaiso ea oache
- 4 ho 32 MHz kristale oscillator
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 8 MHz RC e nang le khetho ea x 16 PLL
- Oscillator ea ka hare ea 40 kHz
• Ho fihla ho likou tse 51 tse potlakileng tsa I/O, kaofela li ka khonahala ho li-vectors tse sitisang kantle, tse 'maloa tse 5 tse mamellang
• Khokahano ea matrix
• 7-channel DMA e tšehetsa li-timers, ADCs, SPIs, I2Cs, USARTs le DAC
• 1 × ADC 0.20 μs (ho fihla ho likanale tse 15) ka qeto e ka khethoang ea li-bits tse 12/10/8/6, 0 ho isa ho 3.6 V ea phetoho, mokhoa o le mong o felileng / o fapaneng, phepelo ea analoge e arohaneng ho tloha ho 2.0 ho isa ho 3.6 V
• Sensor ea mocheso
• kanale ea 1 x 12-bit DAC e nang le phepelo ea analoge ho tloha ho 2.4 ho isa ho 3.6 V
• Lipapiso tse tharo tse potlakileng tsa analoge ho tloha ho 2.0 ho isa ho 3.6 V.
• 1 x amplifier ea ts'ebetso e ka sebelisoang ka mokhoa oa PGA, litheminale kaofela li fumaneha ka thepa ea analoge ho tloha ho 2.4 ho isa ho 3.6 V.
• Ho fihla ho likanale tse 18 tsa capacitive tse tšehetsang konopo ea ho ama, li-linear le li-rotary sensors
• Ho fihla ho li-timers tse 9
- Nako e le 'ngoe ea 32-bit e nang le ho fihla ho 4 IC/OC/PWM kapa pulse counter le quadrature (keketso) ea encoder
- Nako e le 'ngoe ea 16-bit 6-taolo e tsoetseng pele, e nang le liteishene tse fihlang ho tse 6 tsa PWM, tlhahiso ea nako ea ho qetela le ho emisa tšohanyetso
- Linako tse tharo tsa 16-bit tse nang le IC/OC/OCN kapa PWM, mofuta oa deadtime.le setopong sa tshohanyetso
- Nako e le 'ngoe ea 16-bit ea ho khanna DAC
- Li-timers tse 2 tsa ho shebella (tse ikemetseng, fensetere)
- Sebali sa nako ea SysTick: 24-bit downcounter
• Khalendara ea RTC e nang le alamo, ho tsoha nako le nako ho tsoa ho Stop/Standby
• Mahokelo a puisano
- Li-I2C tse tharo tse nang le sinki ea hajoale ea 20 mA ho ts'ehetsa mokhoa o potlakileng le ho feta
- Ho fihla ho li-USART tse 3, 1 e nang le ISO 7816 I/F, sesebelisoa sa ho sibolla baudrate le sebaka sa Dual clock domain.
- Ho fihla ho li-SPI tse peli tse nang le li-multiplexed full duplex I2S
- Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng
- 1 x segokahanyi sa CAN (2.0B E sebetsa)
- Transmitter ea infrared
• Sesebelisoa sa serial wire debug (SWD), JTAG
• ID e ikhethang ea 96-bit