SPC5675KFF0MMS2 32bit Microcontrollers MCU 2MFlash 512KSRAM EBI
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | NXP |
| Sehlopha sa Sehlahisoa: | 32-bit Microcontrollers - MCU |
| RoHS: | Lintlha |
| Letoto: | MPC5675K |
| Mounting Style: | SMD/SMT |
| Sephutheloana / Taba: | BGA-473 |
| Koko: | e200z7d |
| Boholo ba Memori ea Lenaneo: | 2 MB |
| Boholo ba RAM ea data: | 512 kB |
| Bophara ba Bese ea Data: | 32 hanyane |
| Qeto ea ADC: | 12 hanyane |
| Boholo ba Nako ea Oache: | 180 MHz |
| Supply Voltage - Min: | 1.8 V |
| Supply Voltage - Max: | 3.3 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 125 C |
| Tšoaneleho: | AEC-Q100 |
| Sephutheloana: | Terei |
| Analog Supply Voltage: | 3.3 V/5 V |
| Lebitso: | Li-semiconductors tsa NXP |
| Mofuta oa RAM ea data: | SRAM |
| I/O Voltage: | 3.3 V |
| Ha e Mamelle Mongobo: | Ee |
| Letoto la processor: | MPC567xK |
| Sehlahisoa: | MCU |
| Mofuta oa Sehlahisoa: | 32-bit Microcontrollers - MCU |
| Mofuta oa Memori ea Lenaneo: | Khanya |
| Bongata ba Pakete ea Feme: | 420 |
| Sehlopha-potlana: | Li-microcontrollers - MCU |
| Linako tsa ho shebella: | Sebali sa nako ea Watchdog |
| Karolo # Litlhaloso: | 935310927557 |
| Boima ba Yuniti: | 0.057260 oz |
♠ MPC5675K Microcontroller
MPC5675K microcontroller, tharollo ea SafeAssure, keTaolo e kentsoeng ea 32-bit e etselitsoeng mokhanni ea tsoetseng pelelitsamaiso tsa thuso tse nang le RADAR, litšoantšo tsa CMOS, LIDARle li-sensor tsa ultrasonic, le taolo ea makoloi a mangata a 3-phaselits'ebetso joalo ka likoloing tsa motlakase tse nyalisitsoeng (HEV) holikoloi le mocheso o phahameng likopo tsa indasteri.
Setho sa lelapa la NXP Semiconductor's MPC5500/5600,e na le Buka E e lumellanang le Power Architecturemotheo oa theknoloji o nang le Variable Length Encoding (VLE).Senamantlha e lumellana le Power Architecture e kentsoengsehlopha, 'me ke karolo ea 100 lekholong mokhoa oa mosebedisi o lumellana lemeralo ea mantlha ea litaelo tsa basebelisi ba Power PC™ (UISA).E fana ka ts'ebetso ea sistimi ho fihlela makhetlo a mane ho feta ea eonaMPC5561 pele ho moo, ha e ntse e u tlisetsa ho tšepahala le hoho tloaelana le theknoloji e netefalitsoeng ea Power Architecture.
Sehlopha se akaretsang sa hardware le softwarelisebelisoa tsa ntlafatso li fumaneha ho thusa ho nolofatsa le ho potlakisamoralo oa tsamaiso.Tšehetso ea ntlafatso e fumaneha ho tlohalisebelisoa tse etellang pele barekisi ba fanang ka li-compilers, li-debugger leditikoloho tsa ntshetsopele ya ketsiso.
• Ts'ebetso e phahameng ea e200z7d dual core
- 32-bit Power Architecture theknoloji ea CPU
- Ho fihla ho maqhubu a mantlha a 180 MHz
- Moko oa litaba tse peli
- Khouto ea bolelele bo feto-fetohang (VLE)
- Setsi sa tsamaiso ea memori (MMU) se nang le lintlha tse 64
— 16 KB cache ea litaelo le 16 KB data cache
• Mohopolo o teng
- Ho fihla ho 2 MB memori ea khoutu e nang le ECC
— 64 KB data flash memory e nang le ECC
- Ho fihla ho 512 KB on-chip SRAM e nang le ECC
• SIL3/ASILD Khopolo e ncha ea polokeho: Mokhoa oa LockStep le tšireletso e sa sireletsehang
- Sphere of replication (SoR) bakeng sa likarolo tsa bohlokoa
- Likarolo tsa tlhahlobo ea ho hloka mosebetsi mabapi le sephetho sa SoR se hokahaneng le FCCU
- Setsi sa pokello ea liphoso le taolo (FCCU)
- Teko ea boithaopo ea nako ea boot bakeng sa memori (MBIST) le logic (LBIST) e hlohlelletsoang ke hardware
- Teko ea boithaopo ea nako ea boot bakeng sa ADC le memori ea flash
- Sebali sa nako se ntlafalitsoeng se ntlafalitsoeng sa polokeho
- Silicon substrate (die) sensor ea mocheso
- Khatiso e sa bonahaleng (NMI)
- Setsi sa ts'ireletso ea memori ea tikoloho ea 16 (MPU)
- Litsi tsa tlhahlobo ea nako (CMU)
- Setsi sa taolo ea matla (PMU)
- Li-unit tsa cyclic redundancy check (CRC).
• Decoupled Parallel mode bakeng sa ts'ebeliso e phahameng ea li-cores tse replicated
• Nexus Class 3+ segokanyimmediamentsi sa sebolokigolo
• Ho sitisa
- Selaoli sa litšitiso tse 16 tse ka pele
• Li-GPIO ka botsona li ka rarolloa e le ho kenya, tlhahiso, kapa tšebetso e khethehileng
• Li-unit tsa eTimer tse 3 tsa sepheo se akaretsang (liteishene tse 6 e 'ngoe le e 'ngoe)
• Diyuniti tse 3 tsa FlexPWM tse nang le dikanale tse nne tsa 16-bit mojule ka nngwe
• Mahokelo a puisano
- 4 LINFlex modules
- Li-module tse 3 tsa DSPI tse nang le khetho ea boiketsetso ea chip
— Lihokelo tse 4 tsa FlexCAN (2.0B Active) tse nang le lintho tse 32 tsa melaetsa
- Mojule oa FlexRay (V2.1) o nang le likanale tse peli, melaetsa e fihlang ho 128 le ho fihla ho 10 Mbit / s
- Taolo ea Ethernet e potlakileng (FEC)
—3 I2C modules
• Li-converter tse 'nè tsa 12-bit analog-to-digital (ADCs)
— 22 dikanale tsa ho kenya
- Tekanyetso ea "cross triggering unit" (CTU) ho hokahanya phetoho ea ADC ka nako le PWM
• Khokahano ea kantle ea libese
• Selaoli sa memori sa DDR sa 16-bit sa kantle
• Parallel digital interface (PDI)
• On-chip CAN/UART bootstrap loader
• E khona ho sebetsa ka motlakase o le mong oa 3.3 V
- 3.3 V-modules feela: I/O, oscillators, flash memory
- 3.3 V kapa 5 V modules: ADCs, fana ka VREG e ka hare
- 1.8-3.3 V mefuta ea phepelo: DRAM / PDI
• Mocheso oa mocheso oa mateano a sebetsang -40 ho isa ho 150 °C
