FS32K116LFT0VLFT ARM Microcontrollers - MCU S32K116 32-bit MCU, ARM Cortex-M0+

• Litšobotsi tsa ts'ebetso

Matla a matla: 2.7 ho isa ho 5.5 V

- Mefuta e fapaneng ea mocheso: -40 °C ho isa ho 105 °C bakeng sa mokhoa oa HSRUN, -40 °C ho isa ho 150 °C bakeng sa mokhoa oa RUN

• Arm™ Cortex-M4F/M0+ konokono, 32-bit CPU

- E ts'ehetsa maqhubu a ho fihla ho 112 MHz (mokhoa oa HSRUN) ka 1.25 Dhrystone MIPS ka MHz

- Arm Core e ipapisitse le Armv7 Architecture le Thumb®-2 ISA

- Sesebelisoa se kopaneng sa Digital Signal (DSP)

- Selaoli se hlophisitsoeng sa Nested Vectored Interrupt (NVIC)

- Setsi se le seng sa Precision Floating Point (FPU)

• Mahokelo a oache

- 4 - 40 MHz oscillator ea kantle e potlakileng (SOSC) e fihlang ho 50 MHz DC oache ea lisekoere ea kantle ka mokhoa oa oache ea kantle.

- 48 MHz Fast Internal RC oscillator (FIRC)

– 8 MHz Slow Internal RC oscillator (SIRC)

– 128 kHz Low Power Oscillator (LPO)

– Ho fihla ho 112 MHz (HSRUN) Lock Lock Loop (SPLL) ea Sistimi

- Ho fihla ho 20 MHz TCLK le 25 MHz SWD_CLK

- 32 kHz Real Time Counter oache ea kantle (RTC_CLKIN)

• Tsamaiso ea matla

- Matla a tlase a Arm Cortex-M4F/M0+ a nang le ts'ebetso e ntle haholo ea matla

+ Power Management Controller (PMC) e nang le mekhoa e mengata ea matla: HSRUN, RUN, STOP, VLPR, le VLPS.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/e hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane nyeoe ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.

- Ts'ebetso ea li-clock le ts'ebetso ea matla a tlase e tšehetsoeng ke li-peripherals tse itseng.

• Mahokelo a memori le memori

- Ho fihla ho 2 MB ea memori ea lenaneo le ECC

- 64 KB FlexNVM bakeng sa memori ea data flash e nang le ECC le EEPROM emulation.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane tšebeliso ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.

- Ho fihla ho 256 KB SRAM e nang le ECC

- Ho fihla ho 4 KB ea FlexRAM bakeng sa tšebeliso e le mohlala oa SRAM kapa EEPROM

- Ho fihla ho 4 KB Code cache ho fokotsa ts'ebetso ea ts'ebetso ea nako ea phihlello ea memori

- QuadSPI e nang le tšehetso ea HyperBus™

• Analoge ea matšoao a tsoakiloeng

- Ho fihla ho tse peli tsa 12-bit Analog-to-Digital Converter (ADC) e nang le lisebelisoa tse fihlang ho tse 32 tsa analog module ka 'ngoe.

- Sebapali se le seng sa Analog (CMP) se nang le 8-bit Digital ea kahare ho Analog Converter (DAC)

• Ho lokisa bothata

- Serial Wire JTAG Debug Port (SWJ-DP) e kopanya

- Debug Watchpoint le Trace (DWT)

- Instrumentation Trace Macrocell (ITM)

- Teko Port Interface Unit (TPIU)

- Setsi sa Flash Patch le Breakpoint (FPB).

• Sehokelo sa mochini oa batho (HMI)

- Ho fihla ho lithakhisa tse 156 tsa GPIO tse nang le ts'ebetso e sitisang

- Non-Maskable Interrupt (NMI)

• Mahokelo a puisano

- Ho fihla ho li-module tse tharo tsa Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase

- Ho fihla ho li-module tse tharo tsa Low Power Serial Peripheral Interface (LPSPI) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase.

- Ho fihla ho li-module tse peli tsa Low Power Inter-Integrated Circuit (LPI2C) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase

- Ho fihla ho li-module tse tharo tsa FlexCAN (ka tšehetso ea boikhethelo ea CAN-FD)

- Mojule oa FlexIO bakeng sa ho etsisa liprothokholo tsa puisano le li-peripherals (UART, I2C, SPI, I2S, LIN, PWM, joalo-joalo).

- Ho fihla ho 10/100Mbps Ethernet e le 'ngoe e nang le tšehetso ea IEEE1588 le li-module tse peli tsa Synchronous Audio Interface (SAI).

• Polokeho le Tshireletso

- Cryptographic Services Engine (CSEc) e sebelisa sete e felletseng ea mesebetsi ea sephiri joalo ka ha e hlalositsoe ho SHE (Secure Hardware Extension) Specification ea Ts'ebetso.Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola/hlakola e tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112 MHz) hobane tšebeliso ena ha e lumelloe ho sebetsa ka nako e le 'ngoe.Sesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.

- 128-bit Nomoro e Ikhethang ea Boitsebiso (ID).

- Khoutu ea ho lokisa liphoso (ECC) mabapi le mehopolo ea flash le SRAM

- Setsi sa Ts'ireletso ea Memori ea Sistimi (MPU ea Sisteme)

- Mojule oa Cyclic Redundancy Check (CRC).

- Mohlokomeli oa ka hare (WDOG)

- Mojule oa External Watchdog monitor (EWM).

• Nako le taolo

- Ho fihla ho li-module tse robeli tse ikemetseng tsa 16-bit FlexTimers (FTM), tse fanang ka liteishene tse tloaelehileng tse fihlang ho 64 (IC/OC/PWM)

– One 16-bit Low Power Timer (LPTMR) e nang le taolo e tenyetsehang ea ho tsoha

- Li-blocks tse peli tse ka khonehang tsa ho lieha ho etsa lintho (PDB) tse nang le sistimi e tenyetsehang ea trigger

- Nako e le 'ngoe ea 32-bit Low Power Interrupt Timer (LPIT) e nang le liteishene tse 4

- 32-bit Real Time Counter (RTC)

• Sephutheloana

– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP khetho ea sephutheloana

• 16 channel DMA e nang le mehloli e fihlang ho 63 ea kopo e sebelisang DMAMUX