AT91SAM9G45C-CU Microprocessors MPU BGA Green IND TEMP MRL C

Tlhaloso e Khutšoanyane:

Baetsi: Microchip Technology
Sehlopha sa Lihlahisoa: E kenyelelitsoe - Microprocessors
Leqephe la lintlha:Setšoantšo sa AT91SAM9G45C-CU
Tlhaloso: IC MCU 32BIT 64KB ROM 324TFBGA
Boemo ba RoHS: E lumellana le RoHS


Lintlha tsa Sehlahisoa

Likaroloana

Li-tag tsa Sehlahisoa

♠ Tlhaloso ea Sehlahisoa

Sehlahisoa Tšobotsi Boleng ba Tšobotsi
Moetsi: Microchip
Sehlopha sa Sehlahisoa: Li-microprocessors - MPU
RoHS: Lintlha
Mounting Style: SMD/SMT
Sephutheloana / Taba: BGA-324
Letoto: SAM9G45
Koko: ARM926EJ-S
Nomoro ea Cores: 1 ea mantlha
Bophara ba Bese ea Data: 32 hanyane / 16 hanyane
Boholo ba Nako ea Oache: 400 MHz
Memori ea Taelo ea Cache ea L1: 32 kB
L1 Cache Data Memory: 32 kB
Voltage e sebetsang ea phepelo: 1 V
Mocheso o fokolang oa ho sebetsa: - 40 C
Boholo ba Thempereichara ea Tšebetso: + 85 C
Sephutheloana: Terei
Lebitso: Microchip Technology / Atmel
Boholo ba RAM ea data: 64kb
Boholo ba ROM ea data: 64kb
I/O Voltage: 1.8 V, 3.3 V
Mofuta oa Sehokelo: I2C, SPI
Ha e Mamelle Mongobo: Ee
Nomoro ea Linako/Libali: 2 Sebali sa nako
Mofuta oa Sehlahisoa: Li-microprocessors - MPU
Bongata ba Pakete ea Feme: 126
Sehlopha-potlana: Li-microprocessors - MPU
Boima ba Yuniti: 0.059966 oz

♠ SAM9G45 Atmel |SMART ARM-based Embedded MPU

The Atmel ® |SMART ARM926EJ-S™-based SAM9G45 microprocessor unit (eMPU) e kenyelletsa motsoako o batloang khafetsa oa ts'ebetso ea mosebelisi le khokahanyo e phahameng ea data, ho kenyeletsoa LCD controller, resistive touchscreen, camera interface, audio, Ethernet 10/100 le USB e lebelo le phahameng. SDIO.Ka processor e sebetsang ho 400 MHz le li-peripheral tse ngata tsa 100+ Mbps tsa data, SAM9G45 e fana ka ts'ebetso e lekaneng le bandwidth ho marang-rang kapa mecha ea polokelo ea lehae.

SAM9G45 eMPU e ts'ehetsa likhokahano tsa memori ea DDR2 le NAND Flash bakeng sa lenaneo le polokelo ea data.Mohaho oa ka hare oa 133 MHz oa libese tse ngata tse amanang le liteishene tse 37 tsa DMA, sebopeho sa libese tse peli tsa kantle le mohopolo o phatlalalitsoeng ho kenyeletsoa 64 Kbyte SRAM e ka hlophisoang joalo ka memori e kopantsoeng ka thata (TCM) e ts'ehetsa bandwidth e phahameng e hlokoang ke processor le peripherals tsa lebelo le phahameng.

Jenereithara ea 'Nete e sa Lebelloang ea Nomoro e kentsoe molemong oa ho hlahisa le ho fapanyetsana liprothokholo.

Li-I/Os li tšehetsa ts'ebetso ea 1.8V kapa 3.3V, e ka lokisoang ka boikemelo bakeng sa sebopeho sa memori le li-I/O tsa peripheral.Tšobotsi ena e felisa ka ho feletseng tlhokahalo ea li-shifters tsa boemo ba ka ntle.Ho feta moo e ts'ehetsa sephutheloana sa 0.8 mm ball pitch bakeng sa tlhahiso ea PCB e theko e tlase.

Selaoli sa taolo ea matla sa SAM9G45 se na le ts'ebetso e sebetsang ea oache le karolo ea ho boloka betri e fokotsang tšebeliso ea matla ka mekhoa e sebetsang le ea standby.


  • E fetileng:
  • E 'ngoe:

  •  400 MHz ARM926EJ-S ARM® Thumb® Processor
    ̶ 32 Kbytes Data Cache, 32 Kbytes Instruction Cache, MMU

     Likhopotso
    ̶ DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR
    ̶ Seboka sa Kantle sa Libese se tšehetsang 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, CompactFlash®, SLC NAND Flash e nang le ECC
    ̶ 64 Kbytes ka hare ho SRAM, phihlello ea potoloho e le 'ngoe ka lebelo la sistimi kapa lebelo la processor ka sebopeho sa TCM
    ̶ 64 Kbytes ROM ea ka hare, mokhoa oa ho kenya bootstrap

     Lithako
    ̶ LCD Controller (LCDC) e tšehetsang STN le TFT e bonts'a ho fihla ho 1280*860
    ̶ ITU-R BT.601/656 Image Sensor Interface (ISI)
    ̶ Dual High Speed ​​USB Host le Sesebediswa sa USB sa Lebelo le Phahameng se nang le On-Chip Transceivers
    ̶ 10/100 Mbps Ethernet MAC Controller (EMAC)
    ̶ Baamoheli ba Karete ea Memori ea Lebelo le Phahameng (SDIO, SDCard, e.MMC le CE ATA)
    ̶ AC'97 Controller (AC97C)
    ̶ Lisebelisoa tse peli tsa Master/Slave Serial Peripheral Interfaces (SPI)
    ̶ 2 Likanale tse tharo tsa 16-bit Timer/Counters (TC)
    ̶ Balaoli ba babeli ba Synchronous Serial (mokhoa oa I2S)
    ̶ Selaoli sa PWM se nang le likanale tse 'ne
    ̶ Li-interface tse 2 tse nang le lithapo tse peli (TWI)
    ̶ Li-USART tse 'ne tse nang le mekhoa ea ISO7816, IrDA, Manchester le SPI;Setsi se le seng sa Debug (DBGU)
    ̶ 8-channel 10-bit ADC e nang le tšehetso ea 4-wire Touchscreen
    ̶ Ngola Lirekoto tse Sirelelitsoeng

     Sengoliloeng
    ̶ Jenereithara ea Nomoro e sa Lebelloang ea 'Nete (TRNG)

     Sistimi
    ̶ 133 MHz leshome le metso e 'meli lera la 32-bit AHB Bus Matrix
    ̶ Likanale tse 37 tsa DMA
    ̶ Boot ho tsoa ho NAND Flash, SDCard, DataFlash kapa serial DataFlash
    ̶ Seta Setaolo bocha (RSTC) ka On-chip Power-on Reset
    ̶ Li-Oscillator tsa Crystal tsa 32768 Hz tse Khethehang le 12 MHz
    ̶ Ka hare ho Matla a tlase 32 kHz RC Oscillator
    ̶ PLL e le 'ngoe bakeng sa sistimi le 480 MHz PLL e ntlafalitsoeng bakeng sa USB High Speed
    ̶ Lits'oants'o tse peli tsa Oache ea Kantle tse lokiselitsoeng
    ̶ Advanced Interrupt Controller (AIC)
    ̶ Periodic Interval Timer (PIT), Watchdog Timer (WDT), Real-time Timer (RTT) le Real-time Clock (RTC)

     Ke/O
    ̶ Lilaoli tse Hlano tsa 32-bit Parallel Input/Output
    ̶ Mela e 160 e ka hlophisehang ea I/O e Multiplexed ka li-Peripheral I/Os tse fihlang ho tse peli tse kenyang Schmitt trigger

     Sephutheloana
    ̶ 324-ball TFBGA - 15 x 15 x 1.2 mm, 0.8 mm pitch

    Lihlahisoa tse Amanang