TLE8888QK Power Management Specialized – PMIC ENGINECONTROL_IC
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | Infineon |
| Sehlopha sa Sehlahisoa: | E Khethehileng Taolo ea Matla - PMIC |
| Letoto: | TLE8888 |
| Mofuta: | Tsamaiso ea Enjene |
| Mounting Style: | SMD/SMT |
| Sephutheloana/Nyeto: | LQFP-100 |
| Sephetho sa Hona Joale: | 15 mA |
| Sebaka sa Matla a Kenang: | 9 ho isa ho 28 V |
| Output Voltage Range: | 4 ho isa ho 7.5 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 150 C |
| Sephutheloana: | Reel |
| Lebitso: | Infineon Technologies |
| Kenya Voltage, Max: | 28 V |
| Input Voltage, Min: | 9 V |
| Boholo ba Matla a Output: | 7.5 V |
| Voltage e sebetsang ea phepelo: | 9 ho isa ho 28 V |
| Sehlahisoa: | PMIC |
| Mofuta oa Sehlahisoa: | E Khethehileng Taolo ea Matla - PMIC |
| Sehlopha-potlana: | PMIC - Li-IC tsa Tsamaiso ea Matla |
♠ Sistimi ea Mochini oa Enjine IC
TLE8888-1QK ke U-Chip e loketseng lits'ebetso tsa taolo ea enjene ea likoloi.E na le ts'ebetso ea mantlha ea ho fana ka microcontroller le ECU, ho theha puisano ka ntle le ka ntle le ho khanna li-activator tse tloaelehileng tsa EMS.Ho feta moo e laola mokhanni ea ka sehloohong oa relay.
• Voltage pre-regulator
• Taolo e kopantsoeng ea 5 V
• Li-trackers tse 2 tse kopantsoeng tsa 5 V
• Molaoli oa standby
• Arohane phepelo ea ka hare
• Tlhokomelo ea motlakase
• High lebelo CAN segokanyimmediamentsi sa sebolokigolo le tsoha-up ka bese
• Khokahano ea LIN e nang le mokhoa oa lebelo le holimo bakeng sa ts'ebetso ea K-Line
• Ho feto-fetoha hoa kutlo ea ho tsilatsila segokanyimmediamentsi sa sebolokigolo
• Sehokelo sa Microsecond Channel (MSC) se nang le lets'oao la "low voltage differential signal" (LVDS) bakeng sa EME e tlase.
• SPI le lisebelisoa tsa ho laola ka ho toba bakeng sa ho fetoha ha maemo ho phahameng
• Mokhanni ea ka sehloohong oa relay
• Ho fumanwa ha Senotlolo sa Ignition ka konopo e timang tieho e hlahisang
• Kenyo ya ho tsoha • Sebapa nako enjine
• Mehato e 4 ea matla a tlase haholo-holo ho khanna liente (Ron = 550 mΩ) ka ho kenya letsoho
• Mekhahlelo e 3 ea matla a tlase (Ron = 350 mΩ)
• Mehato e 6 ea ho hula bakeng sa ho khanna MOSFET ka har'a sekepe ka maikutlo a drainage
• Mehato e 7 ea mahlakore a tlaase haholo-holo ho khanna li-relay (Ron = 1.5 Ω), e nang le ts'ebetso e liehang ea ho tima.
• Mehato e 4 ea borokho e nang le maemo a holimo, e nang le ts'ebetso e liehang ea ho tima
• Mehato e 4 ea ho sututsa bakeng sa ho khanna IGBT u le le ka ntle ho board e nang le khatello ea morao-rao le matla a phahameng a motlakase.
• Open-load, short-to-GND le short-to-BAT tlhahlobo
• Tšireletso ea mocheso o feteletseng le ho tloha nakoana ho ea ho BAT
• Mojule oa ho lebela
• AEC ea tšoanelehang
