Li-Microcontrollers tsa STM32F767ZIT6 ARM – MCU e sebetsang hantle le DSP FPU, Arm Cortex-M7 MCU 2 Mbytes ea Flash 216 MHz CPU, Art.
♠ Tlhaloso ea Sehlahisoa
Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
Moetsi: | STMicroelectronics |
Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
RoHS: | Lintlha |
Letoto: | Setšoantšo sa STM32F767ZI |
Mounting Style: | SMD/SMT |
Sephutheloana / Taba: | LQFP-144 |
Koko: | ARM Cortex M7 |
Boholo ba Memori ea Lenaneo: | 2 MB |
Bophara ba Bese ea Data: | 32 hanyane |
Qeto ea ADC: | 3x12 koto |
Boholo ba Nako ea Oache: | 216 MHz |
Nomoro ea li-I/Os: | 114 I/O |
Boholo ba RAM ea data: | 532 kB |
Supply Voltage - Min: | 1.7 V |
Supply Voltage - Max: | 3.6 V |
Mocheso o fokolang oa ho sebetsa: | - 40 C |
Boholo ba Thempereichara ea Tšebetso: | + 85 C |
Sephutheloana: | Terei |
Analog Supply Voltage: | 3.3 V |
Lebitso: | STMicroelectronics |
Qeto ea DAC: | 12 hanyane |
Mofuta oa RAM ea data: | SRAM |
I/O Voltage: | 3.3 V |
Mofuta oa Sehokelo: | CAN, HDMI, I2C, I2S/SPI, SDMMC, SPDIFRX, UART/USART |
Ha e Mamelle Mongobo: | Ee |
Palo ea Likanale tsa ADC: | 24 Channel |
Sehlahisoa: | MCU+FPU |
Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
Mofuta oa Memori ea Lenaneo: | Khanya |
Bongata ba Pakete ea Feme: | 360 |
Sehlopha-potlana: | Li-microcontrollers - MCU |
Lebitso la khoebo: | STM32 |
Linako tsa ho shebella: | Sebali sa nako ea Watchdog |
Boima ba Yuniti: | 0.091712 oz |
♠ Arm® Cortex®-M7 32b MCU+FPU, 462DMIPS, ho fihla ho 2MB Flash/ 512+16+4KB RAM, USB OTG HS/FS, 28 com IF, LCD, DSI
Lisebelisoa tsa STM32F765xx, STM32F767xx, STM32F768Ax le STM32F769xx li thehiloe holim'a setsi sa Arm® Cortex®-M7 32-bit RISC se sebetsang ho fihlela ho 216 MHz.Cortex®-M7 ea mantlha e na le yuniti ea lintlha tse phaphametseng (FPU) e ts'ehetsang litaelo tsa Arm® tse nepahetseng habeli le tsa ts'ebetso e le 'ngoe ea data le mefuta ea data.E boetse e sebelisa sete e felletseng ea litaelo tsa DSP le yuniti ea ts'ireletso ea memori (MPU) e ntlafatsang ts'ireletso ea ts'ebeliso.
Lisebelisoa tsa STM32F765xx, STM32F767xx, STM32F768Ax le STM32F769xx li kenyelletsa mehopolo e kentsoeng ka lebelo le holimo ka memori ea Flash ho fihla ho 2 Mbytes, 512 Kbytes ea SRAM (ho kenyeletsoa 128 Kbytes ea data ea 128 Kbytes ea data ea TCMby ea 'nete ea 6 ea RAM), (bakeng sa lits'ebetso tsa bohlokoa tsa nako ea nnete), 4 Kbytes ea backup SRAM e fumanehang ka mekhoa e tlase ea matla, le mefuta e mengata e pharalletseng ea li-I/O le li-peripheral tse hokahaneng le libese tse peli tsa APB, libese tse peli tsa AHB, bese ea 32-bit ea multi-AHB. matrix le multi layer AXI e hokahanyang e tšehetsang phihlello ea mehopolo ea kahare le kantle.
• Core: Arm® 32-bit Cortex®-M7 CPU e nang le DPFPU, ART Accelerator le L1-cache: 16 Kbytes I/D cache, e lumellang ts'ebetso ea boemo ba 0 ho tsoa mehopolong ea Flash e kentsoeng le kantle, ho fihla ho 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), le litaelo tsa DSP.
• Mehopolo
- Ho fihla ho 2 Mbytes ea Flash memory e hlophisitsoeng ka libanka tse peli e lumellang ho bala-ha u ntse u ngola
- SRAM: 512 Kbytes (ho kenyeletsoa 128 Kbytes ea data TCM RAM bakeng sa data ea bohlokoa ea nako ea sebele) + 16 Kbytes ea litaelo TCM RAM (bakeng sa mekhoa ea bohlokoa ea nako ea sebele) + 4 Kbytes ea backup SRAM
- Taolo ea memori ea kantle e tenyetsehang e nang le bese ea data ea 32-bit: SRAM, PSRAM, SDRAM / LPSDR SDRAM, mehopolo ea NOR/NAND
• Dual mode Quad-SPI
• Litšoantšo
- Chrom-ART Accelerator (DMA2D), graphical accelerator e nolofalletsang sebopeho se ntlafalitsoeng sa mosebelisi
- Hardware JPEG codec
-Molaoli oa LCD-TFT o tšehetsa qeto ea XGA
- Selaoli sa moamoheli sa MIPI® DSI se tšehetsang qeto ea 720p 30 Hz
• Taolo ea oache, reset le phepelo
– 1.7 V ho 3.6 V phepelo ea kopo le I/Os
- POR, PDR, PVD le BOR
- Matla a USB a inehetseng
- 4-to-26 MHz kristale oscillator
- Ka hare 16 MHz e entsoeng ka fektheri e entsoeng ka RC (1% ho nepahala
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 32 kHz RC e nang le calibration
• Matla a fokolang
- Mefuta ea ho Robala, ea Emisa le ea Boemo ba Boemo
- Phepelo ea VBAT bakeng sa RTC, lirekoto tsa "backup" tsa 32 × 32 bit + 4 Kbytes backup SRAM
• 3×12-bit, 2.4 MSPS ADC: ho fihlela ho likanale tse 24
• Lisefe tsa dijithale tsa modulator ea sigma delta (DFSDM), likanale tse 8 / lihloela tse 4
• 2×12-bit D/A converters
• Morero o akaretsang oa DMA: 16-stream DMA controller e nang le FIFOs le tšehetso e phatlohileng
• Ho fihla ho 18-timers: ho fihla ho leshome le metso e meraro 16-bit (1x low-power 16-bit timer e fumaneha ka Stop mode) le tse peli tsa 32-bit timer, e 'ngoe le e 'ngoe e na le ho fihla ho 4 IC/OC/PWM kapa pulse counter le quadrature (keketso ) ho kenya encoder.Linako tsohle tse 15 li matha ho fihla ho 216 MHz.2x balebeli, SysTick timer
• Mokhoa oa ho tlosa bothata
- Lihokelo tsa SWD le JTAG
- Cortex®-M7 Trace Macrocell™
• Ho fihla ho likou tse 168 tsa I/O tse nang le tšitiso
- Ho fihla ho 164 ka potlako I/Os ho fihla ho 108 MHz
– Ho fihla ho 166 5 V-mamello I/Os
• Ho fihla ho li-interface tse 28 tsa puisano
- Ho fihla ho li-interface tse 4 tsa I2C (SMBus / PMBus)
- Ho fihla ho 4 UARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
- Ho fihla ho 6 SPIs (ho fihla ho 54 Mbit / s), 3 e nang le I2S e bonolo ea muxed bakeng sa molumo
- 2 x SAIs (sebopeho sa molumo oa serial)
– 3 × CANs (2.0B Active) le 2x SDMMCs
- SPDFRX segokanyimmediamentsi sa sebolokigolo
- HDMI-CEC
- MDIO segokanyimmediamentsi sa sebolokigolo
• Khokahano e tsoetseng pele
- Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng / molaoli oa moamoheli / OTG se nang le on-chip PHY
- USB 2.0 sesebelisoa sa lebelo le felletseng / seamoheli / OTG se nang le DMA e inehetseng, PHY le ULPI ea on-chip
- 10/100 Ethernet MAC e nang le DMA e inehetseng: e tšehetsa IEEE 1588v2 hardware, MII/RMII
• 8- ho 14-bit segokanyimmediamentsi sa sebolokigolo ho fihla ho 54 Mbyte/s
• Jenereithara ea nomoro ea 'nete e sa reroang
• Karolo ea lipalo ea CRC
• RTC: ho nepahala ha motsotsoana, almanaka ea hardware
• ID e ikhethang ea 96-bit