STM32F427VIT6 ARM Microcontrollers MCU 32B ARM Cortex-M4 2Mb Flash 168MHz CPU

• Koko: Arm® 32-bit Cortex®-M4 CPU e nang le FPU, Adaptive real-time accelerator (ART Accelerator™) e lumellang ts'ebetso ea boemo ba 0 ho tloha ho Flash memory, frequency ho fihla ho 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), le Dhrystone 2.1), le Dhrystone 2.1

• Mehopolo
- Ho fihla ho 2 MB ea memori ea Flash e hlophisitsoeng ka libanka tse peli e lumellang ho bala-ha u ntse u ngola
- Ho fihla ho 256+4 KB ea SRAM ho kenyelletsa le 64-KB ea CCM (memori e kopantsoeng ea mantlha) ea data ea RAM
- Taolo ea memori ea kantle e tenyetsehang e nang le bese ea data e fihlang ho 32-bit: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Mehopolo ea Compact Flash/NOR/NAND

• LCD segokanyimmediamentsi sa sebolokigolo, 8080/6800 mekhoa

• Selaoli sa LCD-TFT se nang le qeto e hlophisehileng ka botlalo (kakaretso ea bophara ho fihla ho lipikselse tse 4096, bolelele bo fihlang ho mela ea 2048 le oache ea pixel ho fihla ho 83 MHz)

• Chrom-ART Accelerator™ bakeng sa tlhahiso e ntlafalitsoeng ea litšoantšo (DMA2D)

• Taolo ea oache, reset le phepelo
– 1.7 V ho 3.6 V phepelo ea kopo le I/Os
- POR, PDR, PVD le BOR
- 4-to-26 MHz kristale oscillator
- Ka hare 16 MHz e entsoeng ka fektheri e entsoeng ka RC (1% ho nepahala)
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 32 kHz RC e nang le calibration

• Matla a fokolang
- Mefuta ea ho Robala, ea Emisa le ea Boemo ba Boemo
- Phepelo ea VBAT bakeng sa RTC, lirekoto tsa "backups" tsa 20 × 32 bit + boikhethelo ba 4 KB backup SRAM

• 3×12-bit, 2.4 MSPS ADC: ho fihla ho dikanale tse 24 le 7.2 MSPS ka mokgwa wa mahlahahlaha a mararo

• 2×12-bit D/A converters

• Morero o akaretsang oa DMA: 16-stream DMA controller e nang le FIFOs le tšehetso e phatlohileng

• Ho fihla ho li-timers tse 17: ho fihla ho li-timers tse leshome le metso e 'meli tsa 16-bit le tse peli tsa 32-bit ho fihla ho 180 MHz, e 'ngoe le e 'ngoe e na le ho fihla ho 4 IC/OC/PWM kapa pulse counter le quadrature (e eketsang) encoder input

• Mokhoa oa ho tlosa bothata
- Lihokelo tsa SWD & JTAG
- Cortex-M4 Trace Macrocell™

• Ho fihla ho likou tse 168 tsa I/O tse nang le tšitiso
- Ho fihla ho 164 I/Os e potlakileng ho fihla ho 90 MHz
– Ho fihla ho 166 5 V-mamello I/Os

• Ho fihla ho li-interface tse 21 tsa puisano
- Ho fihla ho li-interface tsa 3 × I2C (SMBus/PMBus)
- Ho fihla ho 4 UARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, taolo ea modem)
- Ho fihla ho 6 SPIs (45 Mbits / s), 2 e nang le I2S e nang le duplex e felletseng bakeng sa ho nepahala ha sehlopha sa molumo ka molumo oa kahare oa PLL kapa oache ea kantle.
- 1 x SAI (sebapali sa audio sa serial)
- 2 × CAN (2.0B Active) le sebopeho sa SDIO

• Khokahano e tsoetseng pele
- Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng / molaoli oa moamoheli / OTG se nang le on-chip PHY
- USB 2.0 sesebelisoa sa lebelo le felletseng / seamoheli / OTG se nang le DMA e inehetseng, PHY le ULPI ea on-chip
- 10/100 Ethernet MAC e nang le DMA e inehetseng: e tšehetsa IEEE 1588v2 hardware, MII/RMII

• Khokahano ea khamera ea 8- ho isa ho 14-bit e bapileng ho fihla ho 54 Mbytes/s

• Jenereithara ea nomoro ea 'nete e sa reroang

• Karolo ea lipalo ea CRC

• RTC: ho nepahala ha motsotsoana, almanaka ea hardware

• ID e ikhethang ea 96-bit

• Ho khanna likoloi le taolo ea kopo

• Thepa ea bongaka

• Lisebelisoa tsa indasteri: PLC, li-inverters, li-circuit breakers

• Liprinta, le li-scanner

• Lisebelisoa tsa alamo, inthak'homo ea video, le HVAC

• Lisebelisoa tsa mamelwang tsa lapeng