STM32F303ZDT6 ARM Microcontrollers – MCU Mainstream Matshwao a kopantsweng MCUs Arm Cortex-M4 core DSP & FPU, 384 Kbytes of Flash
♠ Tlhaloso ea Sehlahisoa
roduct Sebopeho | Boleng ba Tšobotsi |
Moetsi: | STMicroelectronics |
Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
RoHS: | Lintlha |
Letoto: | Setšoantšo sa STM32F3 |
Mounting Style: | SMD/SMT |
Sephutheloana / Taba: | LQFP-144 |
Koko: | ARM Cortex M4 |
Boholo ba Memori ea Lenaneo: | 384 kB |
Bophara ba Bese ea Data: | 32 hanyane |
Qeto ea ADC: | 4 x 6 hanyane / 8 hanyane / 10 hanyane / 12 hanyane |
Boholo ba Nako ea Oache: | 72 MHz |
Nomoro ea li-I/Os: | 115 I/O |
Boholo ba RAM ea data: | 64kb |
Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V |
Mocheso o fokolang oa ho sebetsa: | - 40 C |
Boholo ba Thempereichara ea Tšebetso: | + 85 C |
Sephutheloana: | Terei |
Lebitso: | STMicroelectronics |
Ha e Mamelle Mongobo: | Ee |
Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
Bongata ba Pakete ea Feme: | 360 |
Sehlopha-potlana: | Li-microcontrollers - MCU |
Lebitso la khoebo: | STM32 |
Boima ba Yuniti: | 0.091712 oz |
♠ ARM® Cortex®-M4 32b MCU+FPU, ho fihla ho 512KB Flash, 80KB SRAM, FSMC, 4 ADCs, 2 DAC ch., 7 comp, 4 Op-Amp, 2.0-3.6 V
Lelapa la STM32F303xD/E le ipapisitse le setsi sa tšebetso se phahameng sa ARM® Cortex®-M4 32-bit RISC se nang le FPU e sebetsang ka makhetlo a 72 MHz, le ho kenya karolo e phaphametseng (FPU), yuniti ea ts'ireletso ea memori (MPU) le trace macrocell e kenelletseng (ETM).Lelapa le kenyelletsa mehopolo e kentsoeng ka lebelo le holimo (512-Kbyte Flash memory, 80-Kbyte SRAM), taolo ea memori e feto-fetohang (FSMC) bakeng sa mehopolo e tsitsitseng (SRAM, PSRAM, NOR le NAND), le mefuta e mengata e fapaneng ea li-I/O tse ntlafalitsoeng. le li-peripheral tse hokahaneng le AHB le libese tse peli tsa APB.
Lisebelisoa li fana ka li-ADC tse 'nè tse potlakileng tsa 12-bit (5 Msps), li-bapisa tse supileng, li-amplifiers tse' nè tse sebetsang, liteishene tse peli tsa DAC, RTC ea matla a tlaase, ho fihla ho li-timers tse hlano tsa 16-bit, nako e le 'ngoe ea 32-bit. , le ho fihla ho li-timers tse tharo tse inehetseng ho taolo ea makoloi.Li boetse li na le li-interfaces tse tloaelehileng le tse tsoetseng pele tsa puisano: ho fihla ho li-I2C tse tharo, ho fihla ho li-SPI tse 'nè (li-SPI tse peli li na le multiplexed full-duplex I2Ss), li-USART tse tharo, ho fihlela ho li-UART tse peli, CAN le USB.Ho fihlella ho nepahala ha sehlopha sa molumo, li-peripheral tsa I2S li ka koaloa ka PLL ea kantle.
Lelapa la STM32F303xD/E le sebetsa ho -40 ho +85 ° C le -40 ho + 105 ° C mocheso ho tloha ho 2.0 ho ea ho 3.6 V ea motlakase.Sete e felletseng ea mokhoa oa ho boloka matla o lumella moralo oa lits'ebetso tsa matla a tlase.
Lelapa la STM32F303xD/E le fana ka lisebelisoa ka liphutheloana tse fapaneng ho tloha ho 64 ho isa ho 144 pin.
Ho itšetlehile ka sesebelisoa se khethiloeng, lihlopha tse fapaneng tsa li-peripheral li kenyelelitsoe.
• Koko: ARM® Cortex®-M4 32-bit CPU e nang le 72 MHz FPU, katiso ea potoloho e le 'ngoe le karohano ea HW, 90 DMIPS (ho tsoa CCM), litaelo tsa DSP le MPU (yuniti ea tšireletso ea memori)
• Maemo a tshebetso:
- VDD, VDDA voltage range: 2.0 V ho 3.6 V
• Mehopolo
- Ho fihla ho 512 Kbytes ea memori ea Flash
- 64 Kbytes ea SRAM, e nang le cheke ea HW e kenngoeng tšebetsong ho 32 Kbytes ea pele.
- Matlafatso ea tloaelo: 16 Kbytes ea SRAM mabapi le litaelo le bese ea data, e nang le cheke ea HW parity (CCM)
- Flexible memory controller (FSMC) bakeng sa mehopolo e tsitsitseng, e nang le Chip Select e mene
• Karolo ea lipalo ea CRC
• Ho seta bocha le taolo ea phepelo
- Ts'ebetso ea ho bulela / ho theola matla (POR / PDR)
- Sesebelisoa sa motlakase se ka khonehang (PVD)
- Mefuta ea matla a tlase: Robala, Emisa le Boemo ba ho ema
- Phepelo ea VBAT bakeng sa RTC le li-backups
• Tsamaiso ea oache
- 4 ho 32 MHz kristale oscillator
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 8 MHz RC e nang le khetho ea x 16 PLL
- Oscillator ea ka hare ea 40 kHz
• Ho fihla ho 115 ka potlako I/Os
- Tsohle li ka fumaneha ho li-vector tse sitisang kantle
- Tse 'maloa tse 5 tse mamellang V
• Khokahano ea matrix
• 12-channel DMA molaoli
• Li-ADCs tse 'ne 0.20 µs (ho fihla ho likanale tse 40) tse nang le qeto e ka khethoang ea li-bits tse 12/10/8/6, 0 ho isa ho 3.6 V, phepelo e arohaneng ea analoge ho tloha ho 2.0 ho isa ho 3.6 V.
• Likanale tse peli tsa 12-bit DAC tse nang le phepelo ea analoge ho tloha ho 2.4 ho isa ho 3.6 V
• Li-analoge tse supileng tse potlakileng ho ea ho seporo tse nang le analoge ho tloha ho 2.0 ho isa ho 3.6 V.
• Li-amplifiers tse 'nè tse ka sebelisoang ka mokhoa oa PGA, li-terminals kaofela li fumaneha ka thepa ea analog ho tloha ho 2.4 ho isa ho 3.6 V.
• Ho fihla ho liteishene tse 24 tsa capacitive tse tšehetsang konopo ea ho ama, li-linear le li-rotary touch.
• Ho fihla ho li-timers tse 14:
- Nako e le 'ngoe ea 32-bit le li-timers tse peli tsa 16-bit tse fihlang ho tse 'ne tsa IC/OC/PWM kapa pulse counter le quadrature (keketso) ea encoder
- Li-timers tse tharo tse tsoetseng pele tsa 16-bit 6, tse nang le liteishene tse fihlang ho tse tšeletseng tsa PWM, tlhahiso ea nako ea ho qetela le ho emisa tšohanyetso
- Nako e le 'ngoe ea 16-bit e nang le li-IC / OC tse peli, OCN / PWM e le 'ngoe, moloko oa nako ea ho qetela le setopo sa tšohanyetso
- Linako tse peli tsa 16-bit tse nang le IC / OC / OCN / PWM, tlhahiso ea nako ea ho qetela le setopo sa tšohanyetso
- Li-timers tse peli tsa ho shebella (tse ikemetseng, fensetere)
- Nako e le 'ngoe ea SysTick: 24-bit downcounter
- Li-timers tse peli tsa 16-bit ho khanna DAC
• Khalendara ea RTC e nang le Alamo, ho tsoha nako le nako ho tsoa ho Stop/Standby
• Mahokelo a puisano
- Sehokelo sa CAN (2.0B se sebetsa)
- Mefuta e meraro e potlakileng ea I2C hammoho (1 Mbit / s) e nang le sinki ea hajoale ea 20 mA, SMBus / PMBus, ho tsoha ho tloha STOP
- Ho fihla ho li-USART / UART tse hlano (sehokelo sa ISO 7816, LIN, IrDA, taolo ea modem)
- Ho fihla ho li-SPI tse 'ne, liforeimi tse 4 ho isa ho tse 16 tse hlophisehang, tse peli tse nang le li-multiplexed half/full duplex I 2S interface
- Sehokelo sa USB 2.0 se nang le lebelo le felletseng se nang le tšehetso ea LPM
- Transmitter ea infrared
• SWD, Cortex®-M4 e nang le FPU ETM, JTAG
• ID e ikhethang ea 96-bit