STM32F205ZGT6 ARM Microcontrollers - MCU 32BIT ARM Cortex M3 Khokahano 1024kB
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | STMicroelectronics |
| Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
| RoHS: | Lintlha |
| Letoto: | Setšoantšo sa STM32F205ZG |
| Mounting Style: | SMD/SMT |
| Sephutheloana/Nyeto: | LQFP-144 |
| Koko: | ARM Cortex M3 |
| Boholo ba Memori ea Lenaneo: | 1 MB |
| Bophara ba Bese ea Data: | 32 hanyane |
| Qeto ea ADC: | 12 hanyane |
| Boholo ba Nako ea Oache: | 120 MHz |
| Nomoro ea li-I/Os: | 114 I/O |
| Boholo ba RAM ea data: | 128 kB |
| Supply Voltage - Min: | 1.8 V |
| Supply Voltage - Max: | 3.6 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 85 C |
| Sephutheloana: | Terei |
| Lebitso: | STMicroelectronics |
| Mofuta oa RAM ea data: | SRAM |
| Boholo ba ROM ea data: | 512 B |
| Mofuta oa Sehokelo: | 2xCAN, 2xUART, 3xI2C, 3xSPI, 4xUSART, SDIO |
| Ha e Mamelle Mongobo: | Ee |
| Nomoro ea Linako/Libali: | 10 Sebali sa nako |
| Letoto la processor: | ARM Cortex M |
| Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
| Mofuta oa Memori ea Lenaneo: | Khanya |
| Bongata ba Pakete ea Feme: | 360 |
| Sehlopha-potlana: | Li-microcontrollers - MCU |
| Lebitso la khoebo: | STM32 |
| Boima ba Yuniti: | 1.290 g |
♠ Arm®-based 32-bit MCU, 150 DMIPs, ho fihla ho 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm.interfaces le khamera
Lelapa la STM32F20x le ipapisitse le setsi sa tšebetso se phahameng sa Arm® Cortex®-M3 32-bit RISC se sebetsang ka sekhahla ho fihla ho 120 MHz.Lelapa le kenyelletsa mehopolo e kentsoeng ka lebelo le holimo (Mohopolo oa Flash ho fihla ho 1 Mbyte, ho fihla ho 128 Kbytes ea sistimi ea SRAM), ho fihla ho 4 Kbytes ea backup SRAM, le mefuta e mengata e fapaneng ea li-I/O tse ntlafalitsoeng le li-peripheral tse hokahantsoeng le libese tse peli tsa APB, libese tse tharo tsa AHB le matrix ea libese tse 32-bit tse ngata tsa AHB.
Lisebelisoa li boetse li na le "adaptive real-time memory accelerator" (ART Accelerator ™) e lumellang ho fihlela ts'ebetso e lekanang le ts'ebetso ea 0 ea boemo ba ho leta ho tloha memori ea Flash ho maqhubu a CPU ho fihla ho 120 MHz.Ts'ebetso ena e netefalitsoe ho sebelisoa benchmark ea CoreMark®.
Lisebelisoa tsohle li fana ka li-ADC tse tharo tsa 12-bit, li-DAC tse peli, RTC ea matla a tlase, li-timers tse leshome le metso e 'meli tsa sepheo se akaretsang sa 16-bit ho kenyelletsa le li-timers tse peli tsa PWM bakeng sa taolo ea makoloi, li-timers tse peli tsa sepheo se akaretsang sa 32-bit.jenereithara ea 'nete ea palo e sa reroang (RNG).Li boetse li na le li-interfaces tse tloaelehileng le tse tsoetseng pele tsa puisano.Lisebelisoa tse ncha tse tsoetseng pele li kenyelletsa SDIO, sebopeho se ntlafalitsoeng sa flexible static memory control (FSMC) (bakeng sa lisebelisoa tse fanoang ka liphutheloana tsa lipini tse 100 le ho feta), le sebopeho sa khamera bakeng sa li-sensor tsa CMOS.Lisebelisoa li boetse li na le li-peripherals tse tloaelehileng.
• Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) e nang le Accelerator ea Adaptive real-time (ART Accelerator™) e lumellang hore ho behoe ts'ebetso ea boemo ba 0 ho tsoa ho Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz ( Dhrystone 2.1)
• Mehopolo
- Ho fihla ho 1 Mbyte ea memori ea Flash
- 512 byte ea memori ea OTP
- Ho fihla ho 128 + 4 Kbytes ea SRAM
- Taolo ea memori e feto-fetohang e tšehetsang likhopotso tsa Compact Flash, SRAM, PSRAM, NOR le NAND
- LCD sebopeho se tšoanang, mekhoa ea 8080/6800
• Taolo ea oache, reset le phepelo
- Ho tloha ho 1.8 ho isa ho 3.6 V phepelo ea kopo + I/Os - POR, PDR, PVD le BOR
- 4 ho 26 MHz kristale oscillator
- Ka hare 16 MHz fektheri e entsoeng ka RC
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 32 kHz RC e nang le calibration
• Mekhoa e fokolang ea matla
- Mefuta ea ho Robala, ea Emisa le ea Boemo ba Boemo
- Phepelo ea VBAT bakeng sa RTC, lirejistara tsa backup tse 20 × 32, le boikhethelo ba 4 Kbytes backup SRAM
• 3 × 12-bit, 0.5 µs ADCs tse nang le likanale tse fihlang ho tse 24 le ho fihla ho 6 MSPS ka mokhoa oa makhetlo a mararo
• 2 × 12-bit D/A converters General-purpose DMA: 16-stream controller e nang le li-FIFO tse bohareng le tšehetso e phatlohileng
• Ho fihla ho li-timers tse 17
- Ho fihla ho li-timers tse leshome le metso e 'meli tsa 16-bit le tse peli tsa 32-bit, ho fihla ho 120 MHz, e 'ngoe le e 'ngoe e na le IC/OC/PWM tse' nè kapa pulse counter le quadrature (keketso) ea encoder
• Mokhoa oa ho tlosa bothata: Ho lokisa terata e ngata (SWD), JTAG, le Cortex®-M3 Embedded Trace Macrocell™
• Ho fihla ho likou tse 140 tsa I/O tse nang le tšitiso:
- Ho fihla ho 136 I/Os e potlakileng ho fihla ho 60 MHz
– Ho fihla ho 138 5 V-mamello I/Os
• Ho fihla ho li-interface tse 15 tsa puisano
- Ho fihla ho li-interface tse tharo tsa I2C (SMBus / PMBus)
- Ho fihla ho li-UART tse nne le li-UART tse peli (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, taolo ea modem)
- Ho fihla ho li-SPI tse tharo (30 Mbit / s), tse peli tse nang le I2S e tsitsitseng ho fihlela ho nepahala ha sehlopha sa molumo ka audio PLL kapa PLL ea kantle.
- 2 × likhokahano tsa CAN (2.0B E sebetsa)
- Sehokelo sa SDIO
• Khokahano e tsoetseng pele
- Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng / molaoli oa moamoheli / OTG se nang le on-chip PHY
- USB 2.0 sesebelisoa sa lebelo le felletseng / seamoheli / OTG se nang le DMA e inehetseng, PHY le ULPI ea on-chip
- 10/100 Ethernet MAC e nang le DMA e inehetseng: e tšehetsa IEEE 1588v2 hardware, MII/RMII
• Khokahano ea khamera e bapileng ea 8- ho isa ho 14-bit (48 Mbyte/s max.)
• Karolo ea lipalo ea CRC
• ID e ikhethang ea 96-bit
