STM32F205VGT6 ARM Microcontrollers - MCU 32BIT ARM Cortex M3 Khokahano 1024kB
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | STMicroelectronics |
| Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
| Letoto: | Setšoantšo sa STM32F205VG |
| Mounting Style: | SMD/SMT |
| Sephutheloana / Taba: | LQFP-100 |
| Koko: | ARM Cortex M3 |
| Boholo ba Memori ea Lenaneo: | 1 MB |
| Bophara ba Bese ea Data: | 32 hanyane |
| Qeto ea ADC: | 12 hanyane |
| Boholo ba Nako ea Oache: | 120 MHz |
| Nomoro ea li-I/Os: | 82 I/O |
| Boholo ba RAM ea data: | 132 kB |
| Supply Voltage - Min: | 1.8 V |
| Supply Voltage - Max: | 3.6 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 85 C |
| Sephutheloana: | Terei |
| Lebitso: | STMicroelectronics |
| Mofuta oa RAM ea data: | SRAM |
| Boholo ba ROM ea data: | 512 B |
| Mofuta oa Sehokelo: | 2xCAN, 2xUART, 3xI2C, 3xSPI, 4xUSART, SDIO |
| Ha e Mamelle Mongobo: | Ee |
| Nomoro ea Linako/Libali: | 10 Sebali sa nako |
| Letoto la processor: | ARM Cortex M |
| Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
| Mofuta oa Memori ea Lenaneo: | Khanya |
| Bongata ba Pakete ea Feme: | 540 |
| Sehlopha-potlana: | Li-microcontrollers - MCU |
| Lebitso la khoebo: | STM32 |
| Boima ba Yuniti: | 0.046530 oz |
• Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) e nang le Accelerator ea Adaptive real-time (ART Accelerator™) e lumellang hore ho behoe ts'ebetso ea boemo ba 0 ho tsoa ho Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz ( Dhrystone 2.1)
• Mehopolo
- Ho fihla ho 1 Mbyte ea memori ea Flash
- 512 byte ea memori ea OTP
- Ho fihla ho 128 + 4 Kbytes ea SRAM
- Taolo ea memori e feto-fetohang e tšehetsang likhopotso tsa Compact Flash, SRAM, PSRAM, NOR le NAND
- LCD sebopeho se tšoanang, mekhoa ea 8080/6800
• Taolo ea oache, reset le phepelo
- Ho tloha ho 1.8 ho isa ho 3.6 V phepelo ea kopo + I / Os
- POR, PDR, PVD le BOR
- 4 ho 26 MHz kristale oscillator
- Ka hare 16 MHz fektheri e entsoeng ka RC
- 32 kHz oscillator bakeng sa RTC e nang le calibration
- Ka hare 32 kHz RC e nang le calibration
• Mekhoa e fokolang ea matla
- Mefuta ea ho Robala, ea Emisa le ea Boemo ba Boemo
- Phepelo ea VBAT bakeng sa RTC, lirejistara tsa backup tse 20 × 32, le boikhethelo ba 4 Kbytes backup SRAM
• 3 × 12-bit, 0.5 µs ADCs tse nang le likanale tse fihlang ho tse 24 le ho fihla ho 6 MSPS ka mokhoa oa makhetlo a mararo
• 2 × 12-bit D/A converters
• Morero o akaretsang oa DMA: 16-stream controller e nang le li-FIFO tse bohareng le tšehetso e phatlohileng
• Ho fihla ho li-timers tse 17
- Ho fihla ho li-timers tse leshome le metso e 'meli tsa 16-bit le tse peli tsa 32-bit, ho fihla ho 120 MHz, e 'ngoe le e 'ngoe e na le IC/OC/PWM tse' nè kapa pulse counter le quadrature (keketso) ea encoder
• Mokhoa oa ho tlosa bothata: Ho lokisa terata e ngata (SWD), JTAG, le Cortex®-M3 Embedded Trace Macrocell™
• Ho fihla ho likou tse 140 tsa I/O tse nang le tšitiso:
- Ho fihla ho 136 I/Os e potlakileng ho fihla ho 60 MHz
– Ho fihla ho 138 5 V-mamello I/Os
• Ho fihla ho li-interface tse 15 tsa puisano
- Ho fihla ho li-interface tse tharo tsa I2C (SMBus / PMBus)
- Ho fihla ho li-USART tse 'ne le li-UART tse peli (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA,
taolo ea modem)
- Ho fihla ho li-SPI tse tharo (30 Mbit / s), tse peli tse nang le I2S e tsitsitseng ho fihlela ho nepahala ha sehlopha sa molumo ka audio PLL kapa PLL ea kantle.
- 2 × likhokahano tsa CAN (2.0B E sebetsa)
- Sehokelo sa SDIO
• Khokahano e tsoetseng pele
- Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng / molaoli oa moamoheli / OTG se nang le on-chip PHY
- USB 2.0 sesebelisoa sa lebelo le felletseng / seamoheli / OTG se nang le DMA e inehetseng, PHY le ULPI ea on-chip
- 10/100 Ethernet MAC e nang le DMA e inehetseng: e tšehetsa IEEE 1588v2 hardware, MII/RMII
• Khokahano ea khamera e bapileng ea 8- ho isa ho 14-bit (48 Mbyte/s max.)
• Karolo ea lipalo ea CRC
• ID e ikhethang ea 96-bit
