STM32F205RET7 ARM Microcontrollers MCU E sebetsa ka mokhoa o phahameng Arm Cortex-M3 MCU 512 Kbytes ea Flash 120MHz CPU

Tlhaloso e Khutšoanyane:

Baetsi: STMicroelectronics
Sehlopha sa Lihlahisoa: E kenyelelitsoe - Li-Microcontrollers
Leqephe la lintlha:Setšoantšo sa STM32F205RET7
Tlhaloso: IC MCU 32BIT 512KB FLASH 64LQFP
Boemo ba RoHS: E lumellana le RoHS


Lintlha tsa Sehlahisoa

Likaroloana

Lisebelisoa

Li-tag tsa Sehlahisoa

♠ Tlhaloso ea Sehlahisoa

Sehlahisoa Tšobotsi Boleng ba Tšobotsi
Moetsi: STMicroelectronics
Sehlopha sa Sehlahisoa: ARM Microcontrollers - MCU
RoHS: Lintlha
Letoto: Setšoantšo sa STM32F205RE
Sephutheloana / Taba: LQFP-64
Sephutheloana: Terei
Lebitso: STMicroelectronics
Ha e Mamelle Mongobo: Ee
Letoto la processor: ARM Cortex M
Mofuta oa Sehlahisoa: ARM Microcontrollers - MCU
Bongata ba Pakete ea Feme: 960
Sehlopha-potlana: Li-microcontrollers - MCU
Lebitso la khoebo: STM32
Boima ba Yuniti: 0.012335 oz

  • E fetileng:
  • E 'ngoe:

  •  Koko: Arm® 32-bit Cortex®-M3 CPU (120 MHzmax) ka Adaptive real-time accelerator (ARTAccelerator™) e lumellang ts'ebetso ea boemo ba ho ema ha 0tshebetso ho tswa ho Flash memori, MPU,150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

     Mehopolo
    - Ho fihla ho 1 Mbyte ea memori ea Flash
    - 512 byte ea memori ea OTP
    - Ho fihla ho 128 + 4 Kbytes ea SRAM
    - Flexible static memori molaoli eoe tšehetsa Compact Flash, SRAM, PSRAM,Mehopolo ea NOR le ea NAND
    - LCD sebopeho se tšoanang, mekhoa ea 8080/6800

     Taolo ea oache, reset le phepelo ea thepa
    - Ho tloha ho 1.8 ho isa ho 3.6 V phepelo ea kopo + I / Os
    - POR, PDR, PVD le BOR
    - 4 ho 26 MHz kristale oscillator
    - Ka hare 16 MHz fektheri e entsoeng ka RC
    - 32 kHz oscillator bakeng sa RTC e nang le calibration
    - Ka hare 32 kHz RC e nang le calibration

     Mekhoa e fokolang ea matla
    - Mefuta ea ho Robala, ea Emisa le ea Boemo ba Boemo
    - Phepelo ea VBAT bakeng sa RTC, 20 × 32 bit backuplirejistara, le boikhethelo ba 4 Kbytes bekapoSRAM

     3 × 12-bit, 0.5 µs ADCs tse nang le likanale tse fihlang ho 24le ho fihla ho 6 MSPS ka mokhoa oa mahlakore a mararo

     2 × 12-bit D/A converters

     DMA ea sepheo se akaretsang: molaoli oa 16-streamka li-FIFO tse bohareng le tšehetso e phatlohileng

     Ho fihla ho li-timers tse 17
    - Ho fihla ho li-timers tse leshome le metso e 'meli tsa 16-bit le tse peli tsa 32-bit,ho fihla ho 120 MHz, e 'ngoe le e' ngoe e fihla ho tse 'ne
    IC/OC/PWM kapa pulse counter lequadrature (keketso) kenyo ya khouto

     Mokhoa oa ho tlosa bothata: serial wire debug (SWD), JTAG,le Cortex®-M3 Embedded Trace Macrocell™

     Ho fihla likoung tse 140 tsa I/O tse nang le tšitiso:
    - Ho fihla ho 136 I/Os e potlakileng ho fihla ho 60 MHz
    – Ho fihla ho 138 5 V-mamello I/Os

     Ho fihla ho likhokahano tse 15 tsa puisano
    - Ho fihla ho li-interface tse tharo tsa I2C (SMBus / PMBus)
    - Ho fihla ho li-UART tse 'ne le li-UART tse peli(7.5 Mbit/s, ISO 7816 interface, LIN, IrDA,taolo ea modem)
    - Ho fihlela ho li-SPI tse tharo (30 Mbit/s), tse peli tse nang lemuxed I2S ho fihlela ho nepahala ha sehlopha sa molumoka audio PLL kapa PLL ea kantle
    - 2 × likhokahano tsa CAN (2.0B E sebetsa)
    - Sehokelo sa SDIO

     Khokahano e tsoetseng pele
    - Sesebelisoa sa USB 2.0 se nang le lebelo le felletseng / host/OTGmolaoli ea nang le on-chip PHY
    - USB 2.0 lebelo le phahameng / lebelo le felletsengsesebelisoa/host/OTG molaoli ea inehetsengDMA, on-chip full-speed PHY le ULPI
    - 10/100 Ethernet MAC e nang le DMA e inehetseng:e tšehetsa lisebelisoa tsa IEEE 1588v2, MII/RMII

     8- ho isa ho 14-bit e bapileng ea khamera(48 Mbyte/s max.)

     Sehlopha sa lipalo sa CRC

     ID e ikhethang ea 96-bit

     Ho khanna koloi le taolo ea ts'ebeliso

     Thepa ea bongaka

     Lisebelisoa tsa indasteri: PLC, li-inverters, li-circuit breakers

     Liprinta, le li-scanner

     Sistimi ea alamo, intercom ea video, le HVAC

     Lisebelisoa tse mameloang lapeng

    Lihlahisoa tse Amanang