S9KEAZN64ACLH ARM Microcontrollers – MCU 64K FLASH 4K RAM 40MHz 64LQFP
♠ Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | NXP |
| Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
| Letoto: | KEA64 |
| Mounting Style: | SMD/SMT |
| Sephutheloana / Taba: | LQFP-64 |
| Koko: | ARM Cortex M0+ |
| Boholo ba Memori ea Lenaneo: | 64kb |
| Bophara ba Bese ea Data: | 32 hanyane |
| Qeto ea ADC: | 12 hanyane |
| Boholo ba Nako ea Oache: | 40 MHz |
| Nomoro ea li-I/Os: | 58 I/O |
| Boholo ba RAM ea data: | 4 kB |
| Supply Voltage - Min: | 2.7 V |
| Supply Voltage - Max: | 5.5 V |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 85 C |
| Tšoaneleho: | AEC-Q100 |
| Sephutheloana: | Terei |
| Analog Supply Voltage: | 2.7 ho isa ho 5.5 V |
| Lebitso: | Li-semiconductors tsa NXP |
| Qeto ea DAC: | 6 hanyane |
| Mofuta oa RAM ea data: | SRAM |
| Boholo ba ROM ea data: | 256 B |
| Mofuta oa ROM ea data: | EEPROM |
| Mofuta oa Sehokelo: | I2C, SPI, UART |
| Ha e Mamelle Mongobo: | Ee |
| Palo ea Likanale tsa ADC: | 16 Channel |
| Sehlahisoa: | MCU |
| Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
| Mofuta oa Memori ea Lenaneo: | Khanya |
| Bongata ba Pakete ea Feme: | 800 |
| Sehlopha-potlana: | Li-microcontrollers - MCU |
| Li-Timers: | Sebali sa nako ea Watchdog |
| Karolo # Litlhaloso: | 935312098557 |
| Boima ba Yuniti: | 0.012224 oz |
• Litšobotsi tsa ts'ebetso
Matla a matla: 2.7 ho 5.5 V
- Mofuta oa motlakase oa ho ngola oa Flash: 2.7 ho isa ho 5.5 V
Sebaka sa mocheso (boemo): -40 ho isa ho 125°C
• Tshebetso
- Ho fihla ho 40 MHz Arm® Cortex-M0+ konokono le oache ea libese e fihlang ho 20 MHz
- Potoloho e le 'ngoe ea 32-bit x 32-bit e ngatafatsang
- Kou ea phihlello ea potoloho e le 'ngoe ea I / O
• Mehopolo le dikgokahano tsa memori
- Ho fihla ho 64 KB flash
- Ho fihla ho 256 B EEPROM
- Ho fihla ho 4 KB RAM
• Lioache
- Oscillator (OSC) - e tšehetsa kristale ea 32.768 kHz kapa 4 MHz ho 20 MHz kristale kapa resonator ea ceramic; khetho ea matla a tlase kapa li-oscillator tsa phaello e phahameng
- Mohloli oa oache oa ka hare (ICS) - FLL e ka hare e nang le litšupiso tsa kahare kapa kantle, 31.25 kHz e hlophisitsoeng esale pele bakeng sa sistimi ea 40 MHz le oache ea mantlha.
- Oscillator ea ka hare ea 1 kHz ea matla a tlase (LPO)
• Lisebelisoa tsa tsamaiso
- Mojule oa taolo ea matla (PMC) o nang le mekhoa e meraro ea matla: Matha, Ema, Emisa
- Thibelo ea "low-voltage" (LVD) e nang le ho seta bocha kapa ho kena-kenana le libaka tse khethiloeng tsa maeto
- Watchdog e nang le mohloli o ikemetseng oa oache (WDOG)
- Mojule oa cheke ea cyclic redundancy check (CRC)
- Serial wire debug interface (SWD)
- Enjine ea manipulation e nyane (BME)
• Limojule tsa ts'ireletso le botšepehi
- 64-bit nomoro e ikhethang ea boitsebiso (ID) ka chip
• Sehokelo sa mochini oa batho
- Ho fihla ho tse 57 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 22 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 14 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Li-module tse peli ho isa ho tse 8-bit tse sitisang keyboard (KBI)
- Khatiso ea kantle (IRQ)
• Li-module tsa analoge
- E le 'ngoe ho isa ho 16-bit 12-bit SAR ADC, ts'ebetso ka mokhoa oa Stop, mochini oa boikhethelo oa "hardware trigger" (ADC)
- Libapiso tse peli tsa analoge tse nang le 6-bit DAC le kenyelletso e hlophisitsoeng ea referense (ACMP)
• Lisebelisoa tsa nako
- Channel e le 'ngoe ea 6 FlexTimer/PWM (FTM)
- Likanale tse peli tse 2 FlexTimer/PWM (FTM)
- Nako e le 'ngoe ea liteishene tse 2 tse sitisang nako (PIT)
- Oache e le 'ngoe ea nako ea sebele (RTC)
• Mahokelo a puisano
- Li-module tse peli tsa SPI (SPI)
- Ho fihla ho li-module tse tharo tsa UART (UART)
- Mojule o le mong oa I2C (I2C)
• Likhetho tsa sephutheloana
- 64-pin LQFP
- LQFP ea 32-pin
