S9KEAZ128AMLH ARM Microcontrollers – MCU Kinetis E 32-bit MCU, ARM Cortex-M4 core, 128KB Flash, 48MHz, QFP 64
♠ Tlhaloso ea Sehlahisoa
Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
Moetsi: | NXP |
Sehlopha sa Sehlahisoa: | ARM Microcontrollers - MCU |
RoHS: | Lintlha |
Letoto: | KEA128 |
Mounting Style: | SMD/SMT |
Sephutheloana / Taba: | LQFP-64 |
Koko: | ARM Cortex M0+ |
Boholo ba Memori ea Lenaneo: | 128 kB |
Bophara ba Bese ea Data: | 32 hanyane |
Qeto ea ADC: | 12 hanyane |
Boholo ba Nako ea Oache: | 48 MHz |
Nomoro ea li-I/Os: | 71 I/O |
Boholo ba RAM ea data: | 16 kB |
Supply Voltage - Min: | 2.7 V |
Supply Voltage - Max: | 5.5 V |
Mocheso o fokolang oa ho sebetsa: | - 40 C |
Boholo ba Thempereichara ea Tšebetso: | + 125 C |
Tšoaneleho: | AEC-Q100 |
Sephutheloana: | Terei |
Lebitso: | Li-semiconductors tsa NXP |
Qeto ea DAC: | 6 hanyane |
Mofuta oa RAM ea data: | RAM |
Mofuta oa Sehokelo: | I2C, SPI, UART |
Ha e Mamelle Mongobo: | Ee |
Nomoro ea Linako/Libali: | 6 Sebali sa nako |
Letoto la processor: | KEA128 |
Sehlahisoa: | MCU |
Mofuta oa Sehlahisoa: | ARM Microcontrollers - MCU |
Mofuta oa Memori ea Lenaneo: | Khanya |
Bongata ba Pakete ea Feme: | 800 |
Sehlopha-potlana: | Li-microcontrollers - MCU |
Linako tsa ho shebella: | Sebali sa nako ea Watchdog |
Karolo # Litlhaloso: | 935325897557 |
Boima ba Yuniti: | 0.012224 oz |
• Litšobotsi tsa ts'ebetso
Matla a matla: 2.7 ho 5.5 V
- Mofuta oa motlakase oa ho ngola oa Flash: 2.7 ho isa ho 5.5 V
Sebaka sa mocheso (boemo): -40 ho isa ho 125°C
• Tshebetso
- Ho fihla ho 48 MHz Arm® Cortex-M0+ konokono
- Potoloho e le 'ngoe ea 32-bit x 32-bit e ngatafatsang
- Kou ea phihlello ea potoloho e le 'ngoe ea I / O
• Mehopolo le likhokahano tsa memori '
- Ho fihla ho 128 KB flash
- Ho fihla ho 16 KB RAM
• Lioache
- Oscillator (OSC) - e tšehetsa kristale ea 32.768 kHz kapa 4 MHz ho 24 MHz kristale kapa resonator ea ceramic;khetho ea matla a tlase kapa li-oscillator tsa phaello e phahameng
- Mohloli oa oache oa ka hare (ICS) - FLL ea ka hare e nang le tšupiso ea kahare kapa kantle, 37.5 kHz e hlophisitsoeng esale pele bakeng sa oache ea sistimi ea 48 MHz
- Oscillator ea ka hare ea 1 kHz ea matla a tlase (LPO)
• Lisebelisoa tsa tsamaiso
- Mojule oa taolo ea matla (PMC) o nang le mekhoa e meraro ea matla: Matha, Ema, Emisa
- Thibelo ea "low-voltage" (LVD) e nang le ho seta bocha kapa ho kena-kenana le libaka tse khethiloeng tsa maeto
- Watchdog e nang le mohloli o ikemetseng oa oache (WDOG)
- Mojule oa cheke ea cyclic redundancy check (CRC)
- Serial wire debug interface (SWD)
- Sebaka se ikhethileng sa SRAM bitband (BIT-BAND)
- Enjine ea manipulation e nyane (BME)
• Limojule tsa ts'ireletso le botšepehi
– 80-bit unique identification number (ID) nomoro ka chip • Sehokelo sa mochini oa motho
- Ho fihla ho tse 57 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 37 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 22 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 14 tsa sepheo se akaretsang sa tlhahiso / tlhahiso (GPIO)
- Ho fihla ho tse 71 tsa sepheo se akaretsang (GPIO)
- Li-module tse peli tsa 32-bit tse sitisang keyboard (KBI)
- Khatiso ea kantle (IRQ)
• Li-module tsa analoge
- E le 'ngoe ho isa ho 16-bit 12-bit SAR ADC, ts'ebetso ka mokhoa oa Stop, mochini oa boikhethelo oa "hardware trigger" (ADC)
- Libapiso tse peli tsa analoge tse nang le 6-bit DAC le kenyelletso e hlophisitsoeng ea referense (ACMP)
• Lisebelisoa tsa nako
- Channel e le 'ngoe ea 6 FlexTimer/PWM (FTM)
- Likanale tse peli tse 2 FlexTimer/PWM (FTM)
- Nako e le 'ngoe ea liteishene tse 2 tse sitisang nako (PIT)
- Nako e le 'ngoe ea bophara ba pulse (PWT)
- Oache e le 'ngoe ea nako ea sebele (RTC)
• Mahokelo a puisano
- Li-module tse peli tsa SPI (SPI)
- Ho fihla ho li-module tse tharo tsa UART (UART)
- Li-module tse peli tsa I2C (I2C)
- Mojule o le mong oa MSCAN (MSCAN)
• Likhetho tsa sephutheloana
- 80-pin LQFP
- 64-pin LQFP