PIC32MX795F512L-80I/PT 32bit Microcontrollers MCU 512KB Flash 128KB USB ENET
♠ Tlhaloso ea Sehlahisoa
Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
Moetsi: | Microchip |
Sehlopha sa Sehlahisoa: | 32-bit Microcontrollers - MCU |
RoHS: | Lintlha |
Letoto: | PIC32MX7xx |
Mounting Style: | SMD/SMT |
Sephutheloana / Taba: | TQFP-100 |
Koko: | MIPS32 M4K |
Boholo ba Memori ea Lenaneo: | 512 kB |
Boholo ba RAM ea data: | 128 kB |
Bophara ba Bese ea Data: | 32 hanyane |
Qeto ea ADC: | 10 hanyane |
Boholo ba Nako ea Oache: | 80 MHz |
Nomoro ea li-I/Os: | 85 I/O |
Supply Voltage - Min: | 2.3 V |
Supply Voltage - Max: | 3.6 V |
Mocheso o fokolang oa ho sebetsa: | - 40 C |
Boholo ba Thempereichara ea Tšebetso: | + 85 C |
Sephutheloana: | Terei |
Lebitso: | Microchip Technology / Atmel |
Mofuta oa RAM ea data: | RAM |
Bolelele: | 1 limilimithara |
Mofuta oa Sehokelo: | CAN, I2C, SPI, UART, USB |
Bolelele: | 12 limilimithara |
Ha e Mamelle Mongobo: | Ee |
Palo ea Likanale tsa ADC: | 16 Channel |
Nomoro ea Linako/Libali: | 5 Sebali sa nako |
Letoto la processor: | PIC32MX7 |
Sehlahisoa: | MCU |
Mofuta oa Sehlahisoa: | 32-bit Microcontrollers - MCU |
Mofuta oa Memori ea Lenaneo: | Khanya |
Bongata ba Pakete ea Feme: | 119 |
Sehlopha-potlana: | Li-microcontrollers - MCU |
Lebitso la khoebo: | MIPSE32 |
Linako tsa ho shebella: | Sebali sa nako ea Watchdog |
Bophara: | 12 limilimithara |
Boima ba Yuniti: | 0.023175 oz |
Maemo a Tshebetso
• 2.3V ho isa 3.6V, -40ºC ho +105ºC, DC ho isa ho 80 MHzBohareng: 80 MHz/105 DMIPS MIPS32® M4K®
• MIPS16e® mode bakeng sa ho fihla ho 40% ea boholo ba khoutu e nyane
• Boqapi bo sebetsang hantle (C le Assembly).
• Single-cycle (MAC) 32×16 le tse peli potoloho 32×32 atisa
Tsamaiso ea Oache
• 0.9% oscillator ea ka hare (ka mefuta e meng)
• Programmable PLLs le mehloli ea oache oscillator
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Ho tsoha kapele le ho qala
Tsamaiso ea Matla
• Mefuta ea taolo ea matla a tlase (Ho Robala le ho Iketla)
• Ho Hlophisa Motlakase o Kopantsoeng, Brown-out Reset
• 0.5 mA/MHz dynamic current (e tloaelehileng)
• 41 µA IPD ea hajoale (e tloaelehileng)
Litšobotsi tsa Grafiken
• Sehokelo sa Grafiken sa kantle se nang le ho fihla ho 34 Parallel MasterLithakhisa tsa Port (PMP):
- Interface ho molaoli oa litšoantšo oa kantle
- E khona ho khanna LCD ka kotloloho ka DMA lemohopolo o kahare kapa kantle
Litšobotsi tsa Analog
• ADC Mojule:
- Sekhahla sa 10-bit 1 Msps ka Mohlala o le mong le Ho Tšoara (S&H)
- lintlha tse 16 tsa analoge
- E ka sebetsa nakong ea Boroko
• Mehloli ea ADC e feto-fetohang le e ikemetseng
• Bapisa:
- Li-module tse peli tsa Comparator tse kenyang lintho tse peli
- Litšupiso tse hlophisitsoeng tse nang le lintlha tse 32 tsa motlakase
Li-Timer/Output Bapisa/Input Capture
• Linako tse Hlano tse Akaretsang tsa Morero:
- Tse hlano 16-bit le ho fihla ho tse peli 32-bit Li-Timer/Counters
• Limojule tse hlano tsa Output Compare (OC).
• Limojule tse hlano tsa Input Capture (IC).
• Mojule oa Nako ea 'Nete oa Clock le Khalendara (RTCC).
Li-interface tsa puisano
• Selaoli sa OTG se lumellanang le USB 2.0-Full-Speed
• 10/100 Mbps Ethernet MAC e nang le sebopeho sa MII le RMII
• KANNA module:
- 2.0B E sebetsa ka DeviceNet™ e sebetsanang le tšehetso
• Limojule tse tšeletseng tsa UART (20 Mbps):
- E ts'ehetsa liprothokholo tsa LIN 2.1 le tšehetso ea IrDA®
• Ho fihla ho li-module tsa SPI tsa terata tse 4 (25 Mbps)
• Ho fihla ho li-module tsa I2C tse hlano (ho fihla ho 1 Mbaud) ka SMBustshehetso
• Parallel Master Port (PMP)
Mohopolo o otlolohileng (DMA)
• Ho fihla ho likanale tse robeli tsa hardware DMA e nang le othomathikeho lemoha boholo ba data
• 32-bit Programmable Cyclic Reundancy Check (CRC)
• Likanale tse ling tse tšeletseng tse inehetseng ho USB, Ethernet leCAN modules
Kenyeletso/Sehlahisoa
• 15 mA kapa 10 mA mohloli / sinki bakeng sa VOH / VOL e tloaelehileng leho fihla ho 22 mA bakeng sa VOH1 e sa tloaelehang
• Lithako tse mamellang 5V
• Li-drain tse ka hloahloang le tse huloang
• Litšitiso tsa ka ntle
Sehlopha sa B Tšehetso
• Laeborari ea Tšireletso ea Sehlopha sa B, IEC 60730Tšehetso ea ntlafatso ea Debugger
• In-circuit le in-application programming
• segokanyimmediamentsi sa sebolokigolo sa MIPS® sa 4-wire JTAG
• Se nang moeli lenaneo le tse tšeletseng rarahaneng ya data breakpoints
• IEEE 1149.2-compatible (JTAG) moeli oa scan