MAX16833CAUE/V+T Bakhanni ba Mabone a LED ba Phahameng ka ho Fetisisa ba HB ba LED ba nang le Kutlo e Kopantsoeng e Phahameng ea Hona Joale
♠ Tlhaloso ea Sehlahisoa
Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
Moetsi: | Maxim e kopantsoe |
Sehlopha sa Sehlahisoa: | Bakhanni ba Lebone la LED |
RoHS: | Lintlha |
Letoto: | MAX16833C |
Mounting Style: | SMD/SMT |
Sephutheloana / Taba: | TSSOP-16 |
Nomoro ea Liphetho: | 1 Sephetho |
Input Voltage, Min: | 5 V |
Kenya Voltage, Max: | 65 V |
Tšoaneleho: | AEC-Q100 |
Sephutheloana: | Reel |
Lebitso: | Maxim e kopantsoe |
Matla a Kena: | 5 ho isa ho 65 V |
Nomoro ea Likanale: | 1 Channel |
Pd - Phello ea Matla: | 2089 mW |
Mofuta oa Sehlahisoa: | Bakhanni ba Lebone la LED |
Bongata ba Pakete ea Feme: | 2500 |
Sehlopha-potlana: | Li-IC tsa mokhanni |
Thepa ea Hona Joale - Max: | 4 mA |
Karolo # Litlhaloso: | MAX16833C |
♠High-Voltage HB LED Drivers with Integrated High-Side Current Sense
MAX16833, MAX16833B, MAX16833C, MAX16833D, le MAX16833G ke li-driver tsa LED tse laoloang ke maemo a hajoale bakeng sa boost, buck-boost, SEPIC, flyback, le topologies ea mahlakoreng a holimo.Mokhanni oa dimming o etselitsoeng ho khanna p-channel ea kantle ka letoto le nang le thapo ea LED e fana ka taolo e pharalletseng ea ho fifala.Karolo ena e fana ka phetoho ea hona joale ea PWM e potlakileng haholo ho li-LED ntle le ho fetella kapa maemo a undervoltage.Ntle le ho fifala ha PWM, li-IC li fana ka dimming ea analog ho sebelisa kenyelletso ea DC ho ICTRL.Li-IC li utloa khanya ea LED ka lehlakoreng le phahameng la khoele ea LED.
Mohanyetsi a le mong ho tloha RT/SYNC ho ea fatše o beha maqhubu a ho fetoha ho tloha 100kHz ho isa 1MHz, ha lets'oao la oache la kantle le kopantsoeng hantle le RT/SYNC le lumella li-IC hore li hokahane le oache e kantle.Ho MAX16833/C/G, maqhubu a switjha a ka fokotsoa bakeng sa lits'ebetso tsa marang-rang.MAX16833B/D ho fapana le moo e fana ka voltage ea referense ea 1.64V e nang le mamello ea 2%.
Li-IC li sebetsa holim'a mefuta e mengata ea phepelo ea 5V-to-65V 'me e kenyelletsa 3A sink / mokhanni oa heke ea mohloli bakeng sa ho khanna MOSFET ea matla lits'ebetsong tse phahameng tsa motlakase oa LED.Likarolo tse ling li kenyelletsa sephetho sa fault-indicator output (FLT) bakeng sa maemo a mokhuts'oane kapa a mocheso o feteletseng le "overvolt age-protection sense input" (OVP) bakeng sa tshireletso ya overvoltage.Kutlo ea hona joale ea mahlakoreng a holimo e kopantsoeng le p-channel dimming MOSFET e lumella terminal e ntle ea thapo ea LED hore e khutsufatsoe ho terminal ea ho kenya e positive kapa ho terminal e kenang e fosahetseng ntle le tšenyo ea letho.Ena ke tšobotsi e ikhethang ea li-IC.
● Kopanyo e Fokotsa BOM bakeng sa Mokhanni oa LED o khanyang ka ho Fetisisa ka Wide Input Range Saving Space le Litšenyehelo.
• +5V ho +65V Wide Input Voltage Range e nang le Maximum 65V Boost Output
• Mokhanni o Kenyellelitsoeng oa High-Side pMOS Dimming MOSFET (E lumella Khokahano ea Mohala o le Mong ho li-LED)
• ICTRL Pin bakeng sa Analog Dimming
• Amplifier e Kopantsoeng ea High-Side Current-Sense
• Matla a Felletseng, a Lehlakore le Phahameng, a Hona Joale-Sense Voltage ea 200mV
● Ho Bonolo ho Ntlafatsa ka Matla, Sebaka sa Boto, le Sebaka sa Ts'ebetso sa ho Kena
• Boost, SEPIC, le Buck-Boost Single-Channel LED Drivers
• 2% Tšebeliso e nepahetseng ea 1.64V (MAX16833B/D)
• Lenaneo la Maqhubu a Tshebetso (100kHz ho isa ho 1MHz) le Bokhoni ba Kamahanyo
• Frequency Dithering for Spread-Spectrum Application (MAX16833/C/G)
• Sephutheloana sa TSSOP se Matlafalitsoeng ka Thermally 5mm x 4.4mm, 16-Pin TSSOP se nang le Pete e pepesitsoeng
● Likarolo tsa Tšireletso le Mocheso o Bophara oa Mocheso o Eketsa Tšepahalang ea Tsamaiso
• Short-Circuit, Overvoltage, le Thermal Protection
• Sephetho sa Sesupo sa Phoso
• -40 ° C ho + 125 ° C Ts'ebetso ea Mocheso Range
● Mabone a Kantle a Likoloi:
Mabone a Phahameng a Phahameng/Low-Beam/Signal/Position,
Mabone a Motšehare a mathang (DRLs),
Leseli la Moholi le Likopano tse Adaptive tsa Leseli tse ka Pele
● Mabone a Khoebo, a Liindasteri le a Mehaho