FS32K146HFT0VLHT ARM Microcontrollers MCU S32K146 M4F Flash 1M RAM 128KB

• Litšobotsi tsa ts'ebetso
Matla a matla: 2.7 ho isa ho 5.5 V
- Sebaka sa mocheso oa tikoloho: -40 °C ho isa ho 105 °C bakeng saMokhoa oa HSRUN, -40 °C ho isa ho 150 °C bakeng sa mokhoa oa RUN

• Arm™ Cortex-M4F/M0+ konokono, 32-bit CPU
- E ts'ehetsa maqhubu a ho fihla ho 112 MHz (mokhoa oa HSRUN)ka 1.25 Dhrystone MIPS ka MHz
- Arm Core e ipapisitse le Armv7 Architecture leThumb®-2 ISA
- Sesebelisoa se kopaneng sa Digital Signal (DSP)
- Selaoli se hlophisitsoeng sa Nested Vectored Interrupt(NVIC)
- Setsi se le seng sa Precision Floating Point (FPU)

• Mahokelo a oache
- 4 - 40 MHz e potlakileng ea oscillator ea kantle (SOSC) e nang le holimoho isa ho 50 MHz DC oache ea kantle ea lisekoere ka haremokhoa oa oache oa kantle
- 48 MHz Fast Internal RC oscillator (FIRC)
– 8 MHz Slow Internal RC oscillator (SIRC)
– 128 kHz Low Power Oscillator (LPO)
– Ho fihla ho 112 MHz (HSRUN) Lock ea Mokhahlelo oa SistimiLoop (SPLL)
- Ho fihla ho 20 MHz TCLK le 25 MHz SWD_CLK
- 32 kHz Real Time Counter oache e kantle(RTC_CLKIN)

• Tsamaiso ea matla
– Low-power Arm Cortex-M4F/M0+ konokono e nang lematla a matla a matla
– Power Management Controller (PMC) e nang le tse ngatamekhoa ea matla: HSRUN, RUN, STOP, VLPR, leVLPS. Tlhokomeliso: CSEc (Tshireletso) kapa EEPROM e ngola /Ho hlakola ho tla hlahisa lifolakha tsa liphoso ka mokhoa oa HSRUN (112MHz) hobane nyeoe ena ha e lumelloe hophethisa ka nako e le nngwe. Sesebelisoa se tla hloka hofetohela ho mokhoa oa RUN (80 MHz) ho sebelisa CSEc(Tshireletso) kapa EEPROM e ngola / hlakola.
- Ho ts'oaroa ha nako le ts'ebetso ea motlakase e tlase e ts'ehelitsoeli-peripherals tse khethehileng.

• Mahokelo a memori le memori
- Ho fihla ho 2 MB ea memori ea lenaneo le ECC
- 64 KB FlexNVM bakeng sa memori ea data flash e nang le ECCle mohlala oa EEPROM. Ela hloko: CSEc (Tshireletso) kapaEEPROM e ngola / hlakola e tla hlahisa lifolakha tsa liphoso hoMokhoa oa HSRUN (112 MHz) hobane nyeoe ena ea tšebeliso ee sa dumellwang ho phethahatsa ka nako e le nngwe. Sesebelisoatla hloka ho switjha ho RUN mode (80 MHz) hoetsa CSEc (Security) kapa EEPROM e ngola / hlakola.
- Ho fihla ho 256 KB SRAM e nang le ECC
- Ho fihla ho 4 KB ea FlexRAM hore e sebelisoe joalo ka SRAM kapaEEPROM ketsiso
- Ho fihla ho 4 KB Code cache ho fokotsa ts'ebetsophello ea ho lieha ho fihlella memori
- QuadSPI e nang le tšehetso ea HyperBus™

• Analoge ea matšoao a tsoakiloeng
- Ho fihla ho tse peli tsa 12-bit Analog-to-Digital Converter(ADC) e nang le lisebelisoa tsa analoge tse fihlang ho tse 32 kamojule
- E le 'ngoe ea Analog Comparator (CMP) e nang le 8-bit ea ka hareSefetoleli sa Digital ho Analog (DAC)

• Ho lokisa bothata
- Serial Wire JTAG Debug Port (SWJ-DP) e kopanya
- Debug Watchpoint le Trace (DWT)
- Instrumentation Trace Macrocell (ITM)
- Teko Port Interface Unit (TPIU)
- Setsi sa Flash Patch le Breakpoint (FPB).

• Sehokelo sa mochini oa batho (HMI)
- Ho fihla ho lithakhisa tse 156 tsa GPIO tse nang le ts'ebetso e sitisang
- Non-Maskable Interrupt (NMI)

• Mahokelo a puisano
- Ho fihla ho li-module tse tharo tsa Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) ka tšehetso ea DMAle ho fumaneha ha matla a fokolang
- Ho fihla ho li-module tse tharo tsa Low Power Serial Peripheral Interface (LPSPI) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase.
- Ho fihla ho li-module tse peli tsa Low Power Inter-Integrated Circuit (LPI2C) tse nang le tšehetso ea DMA le ho fumaneha ha matla a tlase
- Ho fihla ho li-module tse tharo tsa FlexCAN (ka tšehetso ea boikhethelo ea CAN-FD)
- Mojule oa FlexIO bakeng sa ho etsisa liprothokholo tsa puisano le li-peripherals (UART, I2C, SPI, I2S, LIN, PWM, joalo-joalo).
- Ho fihla ho 10/100Mbps Ethernet e le 'ngoe e nang le tšehetso ea IEEE1588 le li-module tse peli tsa Synchronous Audio Interface (SAI).

• Polokeho le Tshireletso
- Cryptographic Services Engine (CSEc) e sebelisa sete e felletseng ea mesebetsi ea cryptographic joalo ka ha e hlalositsoe hoSHE (Secure Hardware Extension) Tlhaloso ea Mosebetsi. Tlhokomeliso: CSEc (Security) kapa EEPROM e ngola / hlakola thato
tsosa lifolakha tsa phoso ka mokhoa oa HSRUN (112 MHz) hobane nyeoe ena ha e lumelloe ho sebetsa ka nako e le 'ngoe. Thesesebelisoa se tla hloka ho fetohela ho RUN mode (80 MHz) ho etsa CSEc (Security) kapa EEPROM e ngola / hlakola.
- 128-bit Nomoro e Ikhethang ea Boitsebiso (ID).
- Khoutu ea ho lokisa liphoso (ECC) mabapi le mehopolo ea flash le SRAM
- Setsi sa Ts'ireletso ea Memori ea Sistimi (MPU ea Sisteme)
- Mojule oa Cyclic Redundancy Check (CRC).
- Mohlokomeli oa ka hare (WDOG)
- Mojule oa External Watchdog monitor (EWM).

• Nako le taolo
- Ho fihla ho li-module tse robeli tse ikemetseng tsa 16-bit FlexTimers (FTM), tse fanang ka liteishene tse tloaelehileng tse fihlang ho 64 (IC/OC/PWM)
– One 16-bit Low Power Timer (LPTMR) e nang le taolo e tenyetsehang ea ho tsoha
- Li-blocks tse peli tse ka khonehang tsa ho lieha ho etsa lintho (PDB) tse nang le sistimi e tenyetsehang ea trigger
- Nako e le 'ngoe ea 32-bit Low Power Interrupt Timer (LPIT) e nang le liteishene tse 4
- 32-bit Real Time Counter (RTC)

• Sephutheloana
– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP paketedikgetho

• 16 channel DMA e nang le mehloli e fihlang ho 63 ea kopo e sebelisang DMAMUX