ATMEGA32A-AU 8-bit Microcontrollers – MCU 32KB In-system Flash 2.7V – 5.5V
Tlhaloso ea Sehlahisoa
| Sehlahisoa Tšobotsi | Boleng ba Tšobotsi |
| Moetsi: | Microchip |
| Sehlopha sa Sehlahisoa: | 8-bit Microcontrollers - MCU |
| Koko: | AVR |
| Boholo ba Memori ea Lenaneo: | 32 kB |
| Boholo ba RAM ea data: | 2 kB |
| Sephutheloana / Taba: | TQFP-44 |
| Boholo ba Nako ea Oache: | 16 MHz |
| Qeto ea ADC: | 10 hanyane |
| Nomoro ea li-I/Os: | 32 I/O |
| Supply Voltage - Min: | 2.7 V |
| Supply Voltage - Max: | 5.5 V |
| Mounting Style: | SMD/SMT |
| Bophara ba Bese ea Data: | 8 hanyane |
| Mocheso o fokolang oa ho sebetsa: | - 40 C |
| Boholo ba Thempereichara ea Tšebetso: | + 85 C |
| Letoto: | ATmega32A |
| Sephutheloana: | Terei |
| Lebitso: | Theknoloji ea Microchip |
| Mofuta oa RAM ea data: | SRAM |
| Boholo ba ROM ea data: | 1024 B |
| Mofuta oa ROM ea data: | EEPROM |
| Bolelele: | 1 limilimithara |
| Mofuta oa Sehokelo: | 2-Wire, SPI, UART |
| Bolelele: | 10 limilimithara |
| Ha e Mamelle Mongobo: | Ee |
| Nomoro ea Linako/Libali: | 3 Sebali sa nako |
| Letoto la processor: | megaAVR |
| Sehlahisoa: | Li-MCU |
| Mofuta oa Sehlahisoa: | 8-bit Microcontrollers - MCU |
| Mofuta oa Memori ea Lenaneo: | Khanya |
| Bongata ba Pakete ea Feme: | 160 |
| Sehlopha-potlana: | Li-microcontrollers - MCU |
| Lebitso la khoebo: | AVR |
| Bophara: | 10 limilimithara |
| Boima ba Yuniti: | 0.048325 oz |
ATMEGA32A-AU
• Sesebelisoa se phahameng sa AVR® 8-bit Microcontroller se sebetsang hantle haholo
• Mehaho e tsoetseng pele ea RISC - Litaelo tse Matla tse 131 - Phethahatso ea Potoloho ea Nako e le 'Ngoe ka ho Fetisisa - 32 × 8 General Purpose Working Registers - Fully Static Operation - Ho fihla ho 16MIPS throughput ho 16MHz - On-chip 2-cycle Multiplier
• Likarolo tse phahameng tsa Memori e sa fetoheng - 32Kbytes ea In-System Self-programmable Flash programmemory - 1024Bytes EEPROM - 2Kbytes Internal SRAM - Lipotoloho tsa Ngola / Hlakola: 10,000 Flash/100,000 EEPROM - Ho boloka lintlha C0 lilemo ho 10 °: 25°C(1) - Karolo ea Boikhethelo ea Khoutu ea Bootsoa e nang le Li-Bits tsa Lock tse Ikemetseng
• In-System Programming ka On-chip Boot Program
• Ts'ebetso ea 'Nete ea ho Bala-Ha U Ngola - Lenaneo la Lock bakeng sa Ts'ireletso ea Software
• JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities Ho ya ka JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits ka JTAG Interface
• QTouch® Library Support – Likonopo tsa Capacitive touch, slider le mabili – QTouch le QMatrix™ acquisition – Ho fihla ho likanale tsa kutlo tse 64
• Likarolo tsa Peripheral - Tse peli tsa 8-bit Timer / Counter tse nang le li-Prescalers tse arohaneng le mekhoa ea ho bapisa - Nako e le 'ngoe ea 16-bit / Counter e nang le Prescaler e arohaneng, Mokhoa oa Bapisa, le Mokhoa oa ho Tšoara - Nako ea sebele ea Nako e nang le Oscillator e arohaneng - Mecha e mene ea PWM - 8-channel, 10-bit ADC
• Likanale tse 8 tse nang le sepheo se le seng
• Likanale tse 7 tse fapaneng ka har'a Sephutheloana sa TQFP Feela
• Liteishene tse 2 tse fapaneng tse nang le Phaello e ka Lebelloang ho 1x, 10x, kapa 200x – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator
• Likarolo tse khethehileng tsa Microcontroller - Power-on Reset le Programmable Brown-out Detection - Internal Calibrated RC Oscillator - Mehloli ea ka ntle le ea ka hare ea ho kena-kenana - Mekhoa e Tšeletseng ea Boroko: Ho Idle, ADC Phokotso ea Lerata, Phokotso ea Matla, Power-down, Standby le Extended Standby
• I/O le Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, le 44-pad QFN/MLF
• Li-Voltage tse sebetsang - 2.7V - 5.5V
• Mephato ya Lebelo – 0 – 16MHz
• Tšebeliso ea Motlakase ho 1MHz, 3V, 25°C – E sebetsa: 0.6mA – Mokhoa o sa sebetseng: 0.2mA – Mokhoa oa ho Falla: <1µA
